Design on the Driving Mode of MEMS Vibratory Gyroscope
نویسندگان
چکیده
Driving mode of MEMS (Micro-Electro-Mechanical Systems) Vibratory Gyroscope is discussed in the paper. We analyze the closed-loop circuit of MEMS gyroscope from two aspects of amplitude fixed and frequency locking. In the amplitude fixed circuit, Automatic Gain Control (AGC) circuit is employed to update the amplitude of the driving force, together with a PI controller to improve the accuracy and stability of the system. In the frequency locking circuit, two ways of PLL (Phase Locked Loop) and self-oscillation are used to improve the reliability of the system. Different levels of simulation and circuit implementation are made using the working mode and parameter of the dualtuner output-quality pieces of silicon MEMS gyroscope which is designed by our own laboratory.
منابع مشابه
Design of a Novel MEMS Gyroscope Array
This paper reports a novel four degree-of-freedom (DOF) MEMS vibratory gyroscope. A MEMS gyroscope array is then presented using the novel gyroscope unit. In the design of the proposed 4-DOF MEMS vibratory gyroscope, the elements of the drive-mode are set inside the whole gyroscope architecture, and the elements of sense-mode are set around the drive-mode, which thus makes it possible to combin...
متن کاملDesign and Analysis of a MEMS Comb Vibratory Gyroscope
MEMS (Micro-electro-mechanical Systems) refer to devices or systems integrated with electrical and mechanical components in the scale of microns. Due to its small size, low cost, low power consumption and high efficiency, MEMS technology has been widely used in many fields. In this paper, a novel comb-driven, differential capacitance sensing MEMS vibratory gyroscope based on glass-silicon-glass...
متن کاملClosed-Loop Compensation of the Quadrature Error in MEMS Vibratory Gyroscopes
In this paper, a simple but effective method for compensation of the quadrature error in MEMS vibratory gyroscope is provided. The proposed method does not require any change in the sensor structure, or additional circuit in the feedback path. The mathematical relations of the proposed feedback readout system were analyzed and the proposed solution assures good rejection capabilities. Based on ...
متن کاملDesign and Simulation of MEMS Based Gyroscope
This paper represents a MEMS based gyroscope to measure orientation. Silicon-micro-machined gyro is fabricated on the basis of resonators and they use vibrating mechanical element to sense rotation. The vibratory measurement can be done by measuring the change in capacitance with respect to the voltage or force applied in particular axis. Here MEMS based gyroscope has been designed from Lame mo...
متن کاملSystem Modeling of a MEMS Vibratory Gyroscope and Integration to Circuit Simulation
Recently, consumer applications have dramatically created the demand for low-cost and compact gyroscopes. Therefore, on the basis of microelectromechanical systems (MEMS) technology, many gyroscopes have been developed and successfully commercialized. A MEMS gyroscope consists of a MEMS device and an electrical circuit for self-oscillation and angular-rate detection. Since the MEMS device and c...
متن کامل