Simulating the Arm Movements of a Stepper Motor Controlled Pick- and-Place Robot Using the Stepper Motor Model
نویسندگان
چکیده
This paper describes the simulation of arm movements of a stepper motor controlled pickand-place robot using the mathematical model of a stepper motor. The model includes: a) a model of the stepper model driver board, b) a model of the hybrid stepper motor and load combination, and c) the interconnection of the two models which is used to simulate the motions of the base, shoulder, elbow, and wrist (pitch) motions of the pick-and-place robot. The model is simulated using Simulink and the results of angular displacement from the simulation and actual measurements show good uniformity.
منابع مشابه
Robust Adaptive Fuzzy Sliding Mode Control of Permanent Magnet Stepper Motor with Unknown Parameters and Load Torque
In this paper, robust adaptive fuzzy sliding mode control is designed to control the Permanent Magnet (PM) stepper motor in the presence of model uncertainties and disturbances. In doing so, the nonlinear model is converted to canonical form, then, for designing the controller, the robust sliding mode control is designed to decrease the effects of uncertainties and disturbances. A class of fuzz...
متن کاملDevelopment of Stepper motor based Two DOF Robotic Arm Transferring Liquid using Peristaltic Pump
Sudha Ramasamy, Karthikesh.R, Manikandan.P, Padma Thiagarajan School of Electrical Engineering, VIT University, Vellore, India. School of Biosciences and Technology, VIT University, Vellore, India E-Mail: [email protected] Abstract The aim of this work is to transfer liquid contents from one micro cell to another using two stepper motors and a peristaltic pump. There are two objectives here. One...
متن کاملHigh Precision Stepper Motor Controller Implementation on FPGA with GUI on LabVIEW
Wireless stepper motor controller designed using Very High Speed Integrated Circuit Hardware Description Language (VHDL) and is implemented on SPARATAN Field Programmable Gate Array (FPGA). The proposed motor controller is controlled by using Pulse Width Modulation Technique (PWM) thus giving the very high precision. Due to high torque of stepper motor it is capable of handling the big industri...
متن کاملDesign and Implementation of PWM Stepper Motor Control Based On 32 Bit Arm Cortex Processor
This paper describes the design and implementation of microstepper motor drive and a control system for two-phase hybrid stepper motor. Based on LM3S6965 arm processor, this paper proposes an approach to subdivide the step to microstep with required number of steps for stepper motor to improve positioning accuracy. Sine/cosine microstepping method is used to adjust the current in each winding o...
متن کاملDesign of an I/o Card to Drive Stepper Motors for Computer Aided Control of a Robot Arm
Developments in electronic and computer technology area have increased the importance of computer aided control. The control systems in frequent use are microprocessor control, microcontroller control and the computer aided control. Computer aided control can be implemented by serial port, parallel port or control cards prepared by special purposes. In this paper, a control card to use in compu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013