Pulsed 1.55 μm all-fiber laser combining high energy, ultranarrow linewidth and optimal spatial beam quality

نویسندگان

  • Flavien Liégeois
  • Yves Hernandez
  • Damien Kinet
  • Domenico Giannone
  • Thierry Robin
  • Benoît Cadier
چکیده

In this letter, we report on the study of a new all-fiber laser source suitable for coherent Doppler LIDAR use in the eyesafe domain. The laser consists on a MOPA configuration where the Master Oscillator is a modulated ultranarrow (< 8 kHz) fiber laser. The optical amplifiers are also all-fibered and make use of a new Large Mode Area (LMA) index pedestal fiber that is very effective in limiting the non-linear effects without quality degradation of the laser beam. The amplified pulses have a maximum energy of 0.15 mJ for a duration of 340 ns at a repetition rate of 15 kHz. The average output power of the laser is 2.5 W, free of Stimulated Brillouin Scattering and with a measured M2 = 1.3.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

High energy, single-mode, narrow-linewidth fiber laser source using stimulated Brillouin scattering beam cleanup.

We propose an original nonlinear beam cleaning fiber laser architecture to obtain high energy pulses with a good beam quality and a narrow linewidth. The output beam of a large core Er:Yb co-doped multimode fiber amplifier (M(2) approximately 6, 220 microJ) is converted into a near diffraction limited beam (M(2) = 1.6) through a stimulated Brillouin scattering injection seeded beam cleanup proc...

متن کامل

High peak power pulsed single-mode linearly polarized LMA fiber amplifier and Q-switch laser

We report on the recent progress in the design and development of completely monolithic linearly-polarized pulsed fiber amplifiers seeded by Q-switched fiber laser oscillators. We demonstrate near diffraction limited beam quality with ~20kW peak power (1mJ pulse energy, ~45nsec) pulses and an average power ~20W at 20kHz repetition rate with linearly polarized (>17dB PER) output from a simple MO...

متن کامل

Enhanced Modulation and Noise Characteristics in 1.55 µm QD Lasers using Additional Optical Pumping

The modulation response, relative intensity noise (RIN) and frequency noise (FN) characteristics of quantum dot (QD) lasers are investigated theoretically in the presence of an external optical beam. Using small signal analysis of the rate equations for carriers and photons, it is demonstrated that by injecting excess carriers into the QDs excited state through optical pumping, the modulation r...

متن کامل

Fine Micro-welding of Thin Stainless Steel Sheet by High Speed Laser Scanning

Fraunhofer Institute for Laser Technology had developed the SHADOW welding technique, in which high speed joining with minimal distortion is possible using a pulsed Nd:YAG laser. The possibility of high speed, high quality welding had been also reported by use of a single-mode fiber laser. The combination of micro-beam and high speed laser scanning offers potential advantages for thin metal she...

متن کامل

Development of resonantly cladding-pumped holmium-doped fibre lasers

The resonant pumping of holmium fibre lasers provides a fibre laser platform capable of addressing a wide range of applications that benefit from operation at wavelengths beyond 2.1 μm. This architecture can provide laser devices that promise high efficiency sources in the 2.1 μm spectral region with excellent beam quality and power scalability. This paper presents our recent results of resonan...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009