Effect of an electric field within microscopy focused ion beam (FIB) between manipulator sharp and the ion trap of the electron detector
نویسندگان
چکیده
The manipulation of samples with micro manipulators sharps in the normal axis to the observation plane is practically blind in microscopy focused ion beam (FIB) mono beam. The application of a negative potential to the manipulator sharp has been considered, which causes differences of electrical potential between the detector and the sample holder, generating an electric field between the sharp and the sample. This makes the electrons, aside the sample, undergo a greater deflection, reflecting in poorer contrast image. This deflection depends on a great extension of the sample holder height between the micromanipulator sharp, voltage deflector, q/m electron factor and electron acceleration.
منابع مشابه
The field emission properties of high aspect ratio diamond nanocone arrays fabricated by focused ion beam milling
High aspect ratio diamond nanocone arrays are formed on freestanding diamond film by means of focused ion beam (FIB) milling technology and hot-filament chemical vapor deposition (HFCVD) method. The structure and phase purity of an individual diamond nanocone are characterized by scanning electron microscopy (SEM) and micro-Raman spectroscopy. The result indicates that the diamond cones with hi...
متن کاملHigh Speed TEM Sample Preparation by Xe FIB
Preparation of Transmission Electron Microscope (TEM) samples by Focused Ion Beam (FIB) milling is one of the most precise techniques now routinely used for example in failure analysis or material science. These TEM samples are commonly prepared using Ga FIB technology, starting more than 20 years ago [13]. Presently FIB columns are commonly combined with the Scanning Electron Microscopy (SEM) ...
متن کاملDesign of compact microwave plasma ion sources for focused ion beam
Two types of compact microwave plasma ion sources (MWPIS) for focused ion beam (FIB) have been developed. Cavity resonator type plasma ion source is subjected to make resonant electric field in order to ignite plasma efficiently. The optimum length of resonator and antenna, and position of quartz and antenna have been designed by both simple calculation and computer simulation. The other source...
متن کاملFIB Sample Preparation of Polymer Thin Films on Hard Substrates Using the Shadow-FIB Method
Focused ion beam (FIB) instrumentation has proven to be extremely useful for preparing cross-sectional samples for transmission electron microscopy (TEM) investigations. The two most widely used methods involve milling a trench on either side of an electron-transparent window: the “H-bar” and the “lift-out” methods [1]. Although these two methods are very powerful in their versatility and abili...
متن کاملControlling the Dimensions of Nano-structured Materials Using Fib Sem
Techniques for characterization and methods for fabrication at the nano-scale are becoming more powerful, giving new insights into the spatial relationships between nanostructures and greater control over their development. A case in point is the application of state-of-the-art focused ion beam technology (FIB), in combination with high-performance scanning electron microscopy (SEM), giving the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011