Two- and 13-week inhalation toxicities of indium-tin oxide and indium oxide in rats.

نویسندگان

  • Kasuke Nagano
  • Kaoru Gotoh
  • Tatsuya Kasai
  • Shigetoshi Aiso
  • Tomoshi Nishizawa
  • Makoto Ohnishi
  • Naoki Ikawa
  • Yoko Eitaki
  • Kenichi Yamada
  • Heihachiro Arito
  • Shoji Fukushima
چکیده

OBJECTIVES Two- and 13-week inhalation toxicities of indium-tin oxide (ITO) and indium oxide (IO) were characterized for risk assessments of workers exposed to ITO. METHODS F344 rats of both sexes were exposed by inhalation to ITO or IO aerosol for 6 h/day, 5 day/wk for 2 wk at 0, 0.1, 1, 10 or 100 mg/m(3) or 13 wk at 0, 0.1 or 1 mg/m(3). An aerosol generator and inhalation exposure system was constructed. RESULTS Blood and lung contents of indium were elevated in a dose-related manner in the ITO- and IO-exposed rats. ITO and IO particles were deposited in the lung, mediastinal lymph node and nasal-associated lymphoid tissue. Exposures to ITO and IO induced alveolar proteinosis, infiltrations of alveolar macrophages and inflammatory cells and alveolar epithelial hyperplasia in addition to increased lung weight. ITO affected the lung more severely than IO did. Fibrosis of alveolar wall developed and some of these lesions worsened at the end of the 26-week post-exposure period. CONCLUSIONS Persistent pulmonary lesions including alveolar proteinosis and macrophage infiltration occurred after 2- and 13-week inhalation exposures of rats to ITO and IO. Fibrosis of alveolar wall developed later. These lesions occurred after ITO exposure at the same concentration as the current occupational exposure limit in the USA and at blood indium levels below the biological exposure index in Japan for indium.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Pulmonary toxicity in mice by 2- and 13-week inhalation exposures to indium-tin oxide and indium oxide aerosols.

OBJECTIVES Inhalation toxicities of indium-tin oxide (ITO) and indium oxide (IO) in mice were characterized in comparison with those previously reported in rats. METHODS B6C3F(1) mice of both sexes were exposed by inhalation to ITO or IO aerosol for 6 h/day, 5 day/wk for 2 wk at 0, 0.1, 1, 10 or 100 mg/m(3) or 13 wk at 0, 0.1or 1 mg/m(3). RESULTS ITO and IO particles were deposited in the l...

متن کامل

Synthesis and Morphology Study of Nano-Indium Tin Oxide (ITO) Grains

In this paper, indium tin oxide (ITO) nanoparticles has been prepared by chemical methods under given conditions with solution of indium chloride (InCl3·4H2O), tin chloride (SnCl4·5H2O) in ammonia solution. The samples were characterized by X-ray Diffraction (XRD) and scanning electron microscopy (SEM) analyses after heat treatments. The SEM results showed that, the size of the ITO particles pr...

متن کامل

Synthesis and Morphology Study of Nano-Indium Tin Oxide (ITO) Grains

In this paper, indium tin oxide (ITO) nanoparticles has been prepared by chemical methods under given conditions with solution of indium chloride (InCl3·4H2O), tin chloride (SnCl4·5H2O) in ammonia solution. The samples were characterized by X-ray Diffraction (XRD) and scanning electron microscopy (SEM) analyses after heat treatments. The SEM results showed that, the size of the ITO particles pr...

متن کامل

Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates

Structural, electrical and optical properties of indium tin oxide or ITO (In2O3:SnO2) thin films on different substrates are investigated. A 100-nm-thick pre-deposited zinc oxide (ZnO) buffer layer is utilized to simultaneously improve the electrical and optical properties of ITO films. High purity ZnO and ITO layers are deposited with a radio frequency sputtering in argon ambient with plasma p...

متن کامل

Investigation of Effect of Accumulation Layer Thickness of ENZ material on Electro-Absorption Modulator

In this paper, the performance of an optical modulator based on indium tin oxide is investigated at telecommunication wavelength for different accumulation thickness. The plan of metal-oxide-semiconductor is utilized to change the carrier concentration at indium tin oxide-hafnium oxide interface. An optical mode solver based finite element method has been used to calculate the basic parameters ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of occupational health

دوره 53 2  شماره 

صفحات  -

تاریخ انتشار 2011