Quantification of self-sputtering and implantation during pulsed laser deposition of gold
نویسندگان
چکیده
منابع مشابه
Longitudinal Magneto-Optical Kerr Effect in Ce:YIG Thin Films Incorporating Gold Nanoparticles
We report an experimental study on optical and magneto-optical properties of Cesubstituted yttrium iron garnet thin films incorporating gold nanoparticles. Au nanoparticles were formed by heating Au thin film on cubic quartz and garnet substrate in vacuum chamber and a Ce:YIG layer was deposited on them by the aid of Pulsed laser deposition method. A large enhancement of the longitudinal Kerr e...
متن کاملExploring microstencils for sub-micron patterning using pulsed laser deposition
The possibilities of sub-micron patterning by means of microstencils using pulsed laser deposition were investigated. Stencils with circular and elliptical patterns were used, with pore sizes ranging from 1 μm down to 500 nm. Strontium titanate (SrTiO3), silicon (Si) and self-assembled monolayers on gold were used as substrate materials, whereas nickel (Ni), nickel oxide (NiO) and gold (Au) hav...
متن کاملStructural characteristics of AlN films deposited by pulsed laser deposition and reactive magnetron sputtering: A comparative study
Aluminum nitride films have been deposited on Si~111! substrates at different substrate temperatures using two techniques; pulsed laser deposition or reactive magnetron sputtering. The films deposited by either of the techniques have been characterized by x-ray diffraction and transmission electron microscopy to determine the crystalline quality, grain size, and epitaxial growth relation with r...
متن کاملTime and energy resolved ion mass spectroscopy studies of the ion flux during high power pulsed magnetron sputtering of Cr in Ar and Ar/N2 atmospheres
Mass spectroscopy was used to analyze the energy and composition of the ion flux during high power pulsed magnetron sputtering (HIPIMS/HPPMS) of a Cr target in an industrial deposition system. The ion energy distribution functions were recorded in the time-averaged and time-resolved mode for Ar + , Ar 2+ , Cr + , Cr 2+ , N2 + and N + ions. In the metallic mode the dependence on pulse energy (eq...
متن کاملPost-packaging frequency tuning of microresonators by pulsed laser deposition
This paper presents a post-packaging tuning process for microresonators by PLD (pulsed laser deposition). The microresonators are first hermetically packaged using a RTP (rapid thermal processing) aluminum-to-silicon nitride bonding process. The resonator mass is then altered by adding materials on the surface of the structure using PLD to achieve the desired resonant frequency. The demonstrate...
متن کامل