A comprehensive flow regime map for microchannel flow boiling with quantitative transition criteria
نویسندگان
چکیده
Due to the critical role of vapor confinement in establishing distinct flow and heat transfer characteristics in microchannels (as distinct from those in larger channels), the conditions under which such confinement occurs in microchannels are of great interest. It is shown in the present work that channel dimensions and flow properties alone, as proposed in past studies, are insufficient for determining confinement effects in microchannel boiling. Hence, a new criterion for physical confinement in microchannel flow boiling, termed the convective confinement number, that incorporates the effects of mass flux, as well as channel cross-sectional area and fluid properties, is proposed. This criterion helps determine the conditions under which a channel qualifies as a microchannel for two-phase flow, needing special treatment, and when a macroscale treatment is adequate. In addition, based on previous work by the authors, a new comprehensive flow regime map is developed for a wide range of experimental parameters and channel dimensions, along with quantitative transition criteria based on nondimensional boiling parameters. 2010 Elsevier Ltd. All rights reserved.
منابع مشابه
Flow regime-based modeling of heat transfer and pressure drop in microchannel flow boiling
Local heat transfer coefficients and pressure drops during boiling of the dielectric liquid fluorinert FC-77 in parallel microchannels were experimentally investigated in recent work by the authors. Detailed visualizations of the corresponding two-phase flow regimes were performed as a function of a wide range of operational and geometric parameters. A new transition criterion was developed for...
متن کاملSubcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models
Subcooled flow boiling in multi-microchannels can be used as an efficient thermal management approach in compact electrical devices. Highly subcooled flow boiling of HFE 7100 is studied in two microchannel heat sinks to choose a proper numerical model for simulating boiling flows in microchannels. Results of five different numerical models, including Volume of Fluid (VOF), Eulerian boiling, Eul...
متن کاملPropionic acid extraction in a microfluidic system: simultaneous effects of channel diameter and fluid flow rate on the flow regime and mass transfer
In this work, extraction of propionic acid from the aqueous phase to the organic phase (1-octanol) was performed in T-junction microchannels and effects of channel diameter and fluid flow rate on the mass transfer characteristics were investigated. The two-phase flow patterns in studied microchannels with 0.4 and 0.8 mm diameters were observed. Weber number and surface-to-volume ratio were ca...
متن کاملEffects of channel dimension, heat flux, and mass flux on flow boiling regimes in microchannels
Experiments are conducted with a perfluorinated dielectric fluid, Fluorinert FC-77, to investigate the effects of channel size and mass flux (225–1420 kg/ms) on microchannel flow boiling regimes by means of high-speed photography. Seven different silicon test pieces with parallel microchannels of widths ranging from 100 to 5850 lm, all with a depth of 400 lm, are considered. Flow visualizations...
متن کاملNumerical Simulation of Turbulent Subsonic Compressible Flow through Rectangular Microchannel
In this study, turbulent compressible gas flow in a rectangular micro-channel is numerically investigated. The gas flow assumed to be in the subsonic regime up to Mach number about 0.7. Five low and high Reynolds number RANS turbulence models are used for modeling the turbulent flow. Two types of mesh are generated depending on the employed turbulence model. The computations are performed for R...
متن کامل