RFC 5613 OSPF Link - Local Signaling August 2009
نویسندگان
چکیده
OSPF is a link-state intra-domain routing protocol. OSPF routers exchange information on a link using packets that follow a welldefined fixed format. The format is not flexible enough to enable new features that need to exchange arbitrary data. This document describes a backward-compatible technique to perform link-local signaling, i.e., exchange arbitrary data on a link. This document replaces the experimental specification published in RFC 4813 to bring it on the Standards Track.
منابع مشابه
RFC 4812 OSPF Restart Signaling March 2007
OSPF is a link-state intra-domain routing protocol used in IP networks. Routers find new and detect unreachable neighbors via the Hello subprotocol. Hello OSPF packets are also used to ensure twoway connectivity within time. When a router restarts its OSPF software, it may not know its neighbors. If such a router sends a Hello packet on an interface, its neighbors are going to reset the adjacen...
متن کاملRFC 5614 MANET Extension of OSPF August 2009
This document specifies an extension of OSPFv3 to support mobile ad hoc networks (MANETs). The extension, called OSPF-MDR, is designed as a new OSPF interface type for MANETs. OSPF-MDR is based on the selection of a subset of MANET routers, consisting of MANET Designated Routers (MDRs) and Backup MDRs. The MDRs form a connected dominating set (CDS), and the MDRs and Backup MDRs together form a ...
متن کاملRFC 3883 OSPF DC Inactive
OSPF is a link-state intra-domain routing protocol used in IP networks. OSPF behavior over demand circuits (DC) is optimized in RFC 1793 to minimize the amount of overhead traffic. A part of the OSPF demand circuit extensions is the Hello suppression mechanism. This technique allows a demand circuit to go down when no interesting traffic is going through the link. However, it also introduces a ...
متن کاملOSPF-xTE: Experimental Extension to OSPF for Traffic Engineering
This document defines OSPF-xTE, an experimental traffic engineering (TE) extension to the link-state routing protocol OSPF. OSPF-xTE defines new TE Link State Advertisements (LSAs) to disseminate TE metrics within an autonomous System (AS), which may consist of multiple areas. When an AS consists of TE and non-TE nodes, OSPF-xTE ensures that non-TE nodes in the AS are unaffected by the TE LSAs....
متن کاملRFC 5340 OSPF for IPv 6 July 2008 4 . 4 . 3
This document describes the modifications to OSPF to support version 6 of the Internet Protocol (IPv6). The fundamental mechanisms of OSPF (flooding, Designated Router (DR) election, area support, Short Path First (SPF) calculations, etc.) remain unchanged. However, some changes have been necessary, either due to changes in protocol semantics between IPv4 and IPv6, or simply to handle the incre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009