Observation of Void Formation Induced by Electromigration in Metallic Films *’ **
نویسنده
چکیده
für Naturforschung in cooperation with the Max Planck Society for the Advancement of Science under a Creative Commons Attribution 4.0 International License. Dieses Werk wurde im Jahr 2013 vom Verlag Zeitschrift für Naturforschung in Zusammenarbeit mit der Max-Planck-Gesellschaft zur Förderung der Wissenschaften e.V. digitalisiert und unter folgender Lizenz veröffentlicht: Creative Commons Namensnennung 4.0 Lizenz. 3 2 P. S. HO AND L. D. GLOWINSKI
منابع مشابه
Electromigration analysis of solder joints under ac load: A mean time to failure model
Related Articles Electromigration induced fast L10 ordering phase transition in perpendicular FePt films Appl. Phys. Lett. 102, 022411 (2013) Feedback-controlled electromigration for the fabrication of point contacts Appl. Phys. Lett. 102, 023105 (2013) Rapid reversible electromigration of intercalated K ions within individual MoO3 nanobundle J. Appl. Phys. 113, 024311 (2013) Temperature and pr...
متن کاملElectric field and potential around localized scatterers in thin metal films studied by scanning tunneling potentiometry
Direct observation of electric potential and field variation near local scatterers like grain boundaries, triple points and voids in thin platinum films studied by scanning tunneling potentiometry is presented. The field is highest at a void, followed by a triple point and a grain boundary. The local field near a void can even be four orders of magnitude higher than the macroscopic field. This ...
متن کاملThe Effect of Microstructure on Electromigration-Induced Failure Development
The effect of the microstructure on the electromigration failure development is analyzed. We investigate the influence of the statistical distribution of copper grain sizes on the electromigration time to failure distribution. Also, the effect of the microstructure on the formation and development of an electromigration-induced void is studied by simulation and the results are compared with exp...
متن کاملProcessing, Structure, Properties, and Reliability of Metals for Microsystems
Research on the processing, structure, properties and reliability of metal films and metallic microdevice elements is reviewed. Recent research has demonstrated that inelastic deformation mechanisms of metallic films and microelements are a function of temperature, encapsulation, and dimension. Reduced dimension can lead to strengthening or softening, depending on the temperature and strain rat...
متن کاملMechanism of electromigration-induced failure in the 97Pb–3Sn and 37Pb–63Sn composite solder joints
The electromigration-induced failure in the composite solder joints consisting of 97Pb–3Sn on the chip side and 37Pb–63Sn on the substrate side was studied. The under-bump metallization ~UBM! on the chip side was 5 mm thick electroplated Cu coated on sputtered TiW/Cu and on the substrate side was electroless Ni/Au. It was observed that failure occurred in joints in a downward electron flow ~fro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2013