Selective Resonant Extraction from the Fermilab Main Injector Using Electron Lens
نویسنده
چکیده
We propose to use an electron lens for slow extraction of proton bunches from the Fermilab Main Injector. Negatively charged electron beam colliding with protons causes positive tune shift proportional to the electron current. If the resulting tune satisfies resonance condition, protons move to larger betatron amplitudes as in conventional slow extraction systems. Time variation of the electron current allows slow extraction from particular batches or even slow extraction from a single bunch.
منابع مشابه
Measurement of Electron Cloud Density with Microwaves in the Fermilab Main Injector*
Electron cloud density in the Fermilab Main Injector was measured by observing microwave transmission along the vacuum tube. Presence of the electron cloud reduces the velocity of the microwave signal. Both frequency and time domain methods reveal relative cloud density and time evolution. The effect of beam time structure is clearly evident. The accelerator magnetic field effects the distribut...
متن کاملNarrowband Beam Loading Compensation in the Fermilab Main Injector Accelerating Cavities*
A narrowband beam loading compensation system was installed for the Main Injector Accelerating Cavities. This feedback operates solely on the fundamental resonant mode of the cavity. This paper describes modifications to the high level Radio Frequency system required to make the system operational. These modifications decreased the effect of steady-state beam loading by a factor of 10 and impro...
متن کاملElectron Cloud Measurements in Fermilab Main Injector and Recycler
This conference paper presents a series of electron cloud measurements in the Fermilab Main Injector and Recycler. A new instability was observed in the Recycler in July 2014 that generates a fast transverse excitation in the first high intensity batch to be injected. Microwave measurements of electron cloud in the Recycler show a corresponding dependence on the batch injection pattern. These e...
متن کاملMain Injector Particle Production Experiment (MIPP) at Fermilab
The Main Injector Particle Production Experiment at Fermilab uses particle beams of charged pions, kaons, proton and anti-proton with beam momenta of 5 to 90 GeV/c and thin targets spanning the periodic table from (liquid) hydrogen to uranium to measure particle production cross sections in a full acceptance spectrometer with charged particle identification for particles from 0.1 to 120 GeV/c u...
متن کاملOperational Use of Ionization Profile Monitors at Fermilab*
Ionization profile monitors (IPMs) are installed in the Fermilab Booster, Main Injector and Tevatron. They are used routinely for injection matching measurements. For emittance measurements the IPMs have played a secondary role to the Flying Wires, with the exception of the Booster (where it is the only profile diagnostics). As Fermilab is refocusing its attention on the intensity frontier, non...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001