Medical equipment classification according to corrective maintenance data: a strategy based on the equipment age

نویسندگان

  • Natália Ferreira Oshiyama
  • Ana Carolina Silveira
  • Rosana Almada Bassani
  • José Wilson Magalhães Bassani
چکیده

Introduction: Decision-making on medical equipment management is a daily task for clinical engineers, but it may prove difficult to easily extract relevant information from the large amount of data from computerized maintenance management systems. This article describes a simple method of medical equipment classification based on corrective maintenance indicators. Methods: Three indicators were calculated based on the number of events, duration and cost of corrective maintenance. Three classes were defined according to the indicator values of different equipment ages: class A for 0-4 years, class B for 5-9 years, and class C for equipment older than 10 years. The method was applied to 2,134 pieces of equipment from the Health Service system of the University of Campinas. Results: From the total, 51.7% of the equipment were classified as C, 4.2% as B and 44.1% as A. The infusion pump for general use was the type of equipment of which most units were in the C class (84.7%), even though almost 50% of them were acquired within less than 9 years, and would thus be expected to be classified as A and B. Among the pumps in class C, 39.5% were from a single manufacturer, although the equipments were acquired recently. Conclusion: The developed classification may be an important tool for raising alerts about equipment more prone to maintenance problems, as well as for identification of equipments with acceptable maintenance history, supporting decision-making on equipment replacement.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Maintenance management decision model for preventive maintenance strategy on production equipment

In industries, Preventive Maintenance (PM) is not a new practice to minimise the sudden breakdown of production machine. PM will be performed at predetermine intervals to provide a balance between failure cost and component utilisation (aging). However, most of PM interval is based on experience or original equipment manufacturer (OEM) recommendations. Consequently, the benefits from PM are not...

متن کامل

Optimal Estimation of Weibull Distribution Parameters in order to Provide Preventive-Corrective Maintenance Program for Power Transformers

In this paper, a new method for modelling and estimation of reliability parameters of power transformer components in distribution and transmission voltage levels for preventive-corrective maintenance schedule of transformers is proposed. In this method, with optimal estimation of Weibull distribution parameters using least squares method and input data uncertainty reduction, failure rate and p...

متن کامل

شناسایی خطرات زیست محیطی تجهیزات صنعت نورد گرم فولاد کویر به روش What if و ارزیابی ریسک آن به روش ویلیام فاین

Introduction: One of the requirements of the environmental risk assessment of hot rolling industry is the evaluation of the performance of equipment and devices in the industry and identifying subsequent environmental risks. Methods: This was a quasi-experimental study. After classification of the equipments in the production hall of hot rolling at the Kavir Steel Complex, some operations we...

متن کامل

Optimum Maintenance Strategy Selection using a Hybrid Approach based on Analytical Hierarchy Process and Revised Multi Choice Goal Programming

This study aims to select optimal maintenance strategy for components of an electric motor of the National Iranian Oil Refining and Distribution Company. In this regard, a method based on revised multi choice goal programming and analytic hierarchy process (AHP) is presented. Since improving the equipment reliability is an important issue, reliability centered maintenance (RCM) strategies are i...

متن کامل

کاربرد رویکرد بازرسی بر مبنای ریسک در انتخاب سیاست‌های نگهداری و تعمیرات (نت)

This paper describes Risk Based Inspection (RBI) methodology which is constructed in one of the units of Tehran Oil Refinery, (ISOMAX unit). The result of RBI Execution is a risk matrix which is constructed with Probability of Failure and Consequence of Failure. To define risk, probability of failure and consequence of failure and active damage mechanism were recognized. Riskwise software was a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014