3D-Printed Graphene Antennas and Interconnections for Textile RFID Tags: Fabrication and Reliability towards Humidity
نویسندگان
چکیده
Wepresent the possibilities of 3Ddirect-write dispensing in the fabrication of passiveUHFRFIDgraphene tags on a textile substrate. In our method, the graphene tag antenna is deposited directly on top of the IC strap, in order to simplify the manufacturing process by removing one step, that is, the IC attachment with conductive glue. Our wireless measurement results confirm that graphene RFID tags with printed antenna-IC interconnections achieve peak read ranges of 5.2 meters, which makes them comparable to graphene tags with epoxy-glued ICs. After keeping the tags in high humidity, the read ranges of the tags with epoxy-glued and printed antenna-IC interconnections decrease 0.8 meters and 0.5 meters, respectively. However, after drying, the performance of both types of tags returns back to normal.
منابع مشابه
Additive Manufacturing of Graphene for Identification and Sensing Applications
The huge growth of Internet of Things has been leading to a high demand in multipurpose radio frequency identification tags. The materials and manufacturing choices have subsequently become very essential for a lower cost and desired wireless performance. In addition, eco-friendly aspects are gaining more and more interest. This thesis investigates the possibilities of novel manufacturing metho...
متن کامل3D Printed and Photonically Cured Graphene UHF RFID Tags on Textile, Wood, and Cardboard Substrates
متن کامل
Antenna-Based Passive UHF RFID Sensor Tags - Design and Application
RFID, as a low cost technology with a long life time, provides great potential for transmitting sensor data in combination with the ordinary ID number. The sensor can, for example, be integrated either in the chip or in the antenna of an RFID tag. This thesis focuses on the design of antenna-based UHF RFID sensor tags as wireless sensors at the lowest possible cost level compatible with standar...
متن کاملPrinted RFID Humidity Sensor Tags for Flexible Smart Systems
Radio frequency identification (RFID) and sensing are two key technologies enabling the Internet of Things (IoT). Development of RFID tags augmented with sensing capabilities (RFID sensor tags) would allow a variety of new applications, leading to a new paradigm of the IoT. Chipless RFID sensor technology offers a low-cost solution by eliminating the need of an integrated circuit (IC) chip, and...
متن کاملDesign and Fabrication of Miniaturized Fractal Antennas for Passive UHF RFID Tags
Generally, passive RFID tags consist of an integrated circuit (RFID chip) and an antenna. Because the passive tags are batteryless, the power transfer between the RFID's chip and the antenna is an important factor in the design. The increasing of the available power at the tag will increase the read range of the tag which is a key factor in RFID tags. The passive RFID tag antennas cannot be tak...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017