Friction Testing of Thermoplastic Composites
نویسندگان
چکیده
ULRICH SACHS MSc , SEBASTIAAN HAANAPPEL MSc , Dr. BERT RIETMAN (b) and Prof. REMKO AKKERMAN (a),(b) a) TPRC, University of Twente, Drienerlolaan 5, P.O. Box 217, 7500AE Enschede, the Netherlands, www.tprc.nl, [email protected], [email protected], [email protected] . b) Faculty of Engineering Technology, Chair of Production Technology, University of Twente, Drienerlolaan 5, P.O. Box 217, 7500AE Enschede, the Netherlands, www.utwente.nl/ctw/pt/, [email protected] .
منابع مشابه
Anisotropy of Reinforcement Fibres and Its Influence on the Apparent Interfacial Shear Strength in Thermoplastic Composites
Optimization of the stress transfer capability of the fibre-matrix interphase region is critical to achieving the required performance level in thermoplastic matrix composites. Despite the ever increasing diversity of the reinforcements available for polymer composites, glass fibres still account for 95% of fibre reinforcements used in the composites industry, primarily due to of their highly a...
متن کاملThermal Degradation, Mechanical Properties and Morphology of Wheat Straw Flour Filled Recycled Thermoplastic Composites
Thermal behaviors of wheat straw flour (WF) filled thermoplastic compositeswere measured applying the thermogravimetric analysis and differential scanningcalorimetry. Morphology and mechanical properties were also studied using scanningelectron microscope and universal testing machine, respectively. Presence of WF inthermoplastic matrix reduced the degradation temperature of the composites. One...
متن کاملDamping Behavior of the Phenolic Based Composite Friction Materials Containing Thermoplastic Elastomers (TPEs)
Attempts have been made for the first time to produce a friction material with thermal sensitive modulus by the inclusion of combined plastic/rubber properties of thermoplastic elastomers (TPE) as viscoelastic polymeric materials into the formulation for the purpose of increasing the damping behavior. In order to evaluate the viscoelastic parameters such as loss factor (tan δ) and elastic m...
متن کاملAn Investigation of the Fatigue Induced Failure Modes
It is proposed to use elastomeric composites as artificial joint bearing surfaces to increase their fluid film lubrication and therefore reduce the number of failures which have been attributed to wear mechanisms. The fluid generated between the surfaces supports part of the load and prevents direct contact of the bearing surfaces. However, permanent deformation and failure of model elastomeric...
متن کاملFriction Stir Welding of Dissimilar Poly Methyl Methacrylate and Polycarbonate Sheets
The widespread application of thermoplastic polymers in different aspects of industries has motivated researchers and companies to improve and upgrade their forming, joining and assembling processes to overcome their limitations. One of the newest joining methods of thermoplastics is friction stir welding which is based on frictional heat generated through contact between a rotating tool and th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2011