Software Environment for Robot Control Solutions Design, Optimisation and Testing
نویسندگان
چکیده
In the present paper a software environment for the study and verification of robot control solutions is described. Such a tool is based on closed loop modelling and simulation in the integrated ADAMS-Simulink environment. The proposed method is applied to the study and optimization of the control of a prototypical system, constituted by a reconfigurable robot with parallel architecture and by an open PC based controller. Copyright © 2005 IFAC
منابع مشابه
A New Solution for the Cyclic Multiple-Part Type Three-Machine Robotic Cell Problem based on the Particle Swarm Meta-heuristic
In this paper, we develop a new mathematical model for a cyclic multiple-part type threemachine robotic cell problem. In this robotic cell a robot is used for material handling. The objective is finding a part sequence to minimize the cycle time (i.e.; maximize the throughput) with assumption of known robot movement. The developed model is based on Petri nets and provides a new method to calcul...
متن کاملFlexible Foot/Ankle Based on PKM with Force/Torque Sensor for Humanoid Robot
This paper describes the development of a novel humanoid robot foot/ankle based on an orientation Parallel Kinematic Mechanism for intelligent and flexible control. With three identical Universal-Prismatic-Spherical prismatic-actuated limbs and a central Universal-Revolute passive limb, the PKM can perform three degrees of freedom rotation motions. In order to enable the humanoid robot safely t...
متن کاملDesign, Modeling, Implementation and Experimental Analysis of 6R Robot (TECHNICAL NOTE)
Design, modeling, manufacturing and experimental analysis of a six degree freedom robot, suitable for industrial applications, has been described in this paper. The robot was designed on the assumption that, each joint has an independent DC motor actuator, with gear reduction and measuring sensor for angular joint position. Mechanical design of the robot was done using Mechanical Desktop and ma...
متن کاملDesign and Implementation Methodology for Autonomous Robot Control Systems
This paper describes a general design and implementation approach used for programming and controlling complex robotic systems such as remotely operated submersibles, autonomous submersibles, and robotic manipulator systems. A hierarchical approach to control system design is adopted. The hierarchical design is translated into a component-based software design. All real-time software components...
متن کاملA Hardware-Software Approach for Design and Control of Mechatronics Devices
This paper presents an integration of hardware-software approach for the design and control in real time for mechatronicssystems using low cost hardware, but with high performance. The proposed tools allow both working without in production phaseas in simulation phase, being a useful tool for the design of mechatronics devices. For this purpose Rapid Control Prototypingusing a Model Based Desig...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005