Synchronization of DFIG output voltage to utility grid in wind power system
نویسنده
چکیده
This paper presents a new synchronization algorithm for grid connection of a doubly fed induction generator (DFIG) in a variable speed wind generation system. Stator flux-oriented vector control for backto-back PWM converters in the DFIG rotor circuit is used for synchronization process. By controlling the rotor d-axis current, the magnitude of the stator EMF is adjusted to be equal to the grid voltage. PLL circuit is used to compensate for the phase shift between the stator EMF and the grid voltage. By controlling the turbine pitch angle, the generator speed is determined to adjust the stator frequency to be equal to the grid. The experimental results show a smooth synchronization and fast dynamic responses. Compared to the existing DFIG synchronization algorithms, the proposed method gives fast starting and can take only 2 cycles to be performed and has satisfactory performance and better robustness than existing methods. 2012 Elsevier Ltd. All rights reserved.
منابع مشابه
Modeling and Analysis of DFIG Based Wind Power System Using Instantaneous Power Components
Abstract—As per the statistical data, the Doubly-fed Induction Generator (DFIG) based wind turbine with variable speed and variable pitch control is the most common wind turbine in the growing wind market. This machine is usually used on the grid connected wind energy conversion system to satisfy grid code requirements such as grid stability, Fault Ride Through (FRT), power quality improvement,...
متن کاملImproving the performance of wind turbine equipped with DFIG using STATCOM based on input-output feedback linearization controller
Using the FACTS controllers, such as static synchronous compensator (STATCOM), as it provides continuous reactive power, in the grid including wind turbine (WT) equipped with doubly fed induction generator, for improving voltage profile (under normal circumstances) and providing a transition ability from inductor generator transition state has been proposed. In this paper, in order to contr...
متن کاملImproving the performance of wind turbine equipped with DFIG using STATCOM based on input-output feedback linearization controller
Using the FACTS controllers, such as static synchronous compensator (STATCOM), as it provides continuous reactive power, in the grid including wind turbine (WT) equipped with doubly fed induction generator, for improving voltage profile (under normal circumstances) and providing a transition ability from inductor generator transition state has been proposed. In this paper, in order to contr...
متن کاملA Combined Vector and Direct Power Control for AC/DC/AC Converters in DFIG Based Wind Turbine
The doubly-fed generators (DFIG) have clear superiority for the applications of large capacity and limited-range speed control case due to the partially rated inverter, lower cost and high reliability. These characteristics enable the doubly-fed wound rotor induction machine to have vast applications in wind-driven generation.In this paper Combined Vector and direct power control (CVDPC) strate...
متن کاملSliding-Mode-based Improved Direct Active and Reactive Power Control of Doubly Fed Induction Generator under Unbalanced Grid Voltage Condition
This paper proposes an improved direct active and reactive power control (DPC) strategy for a grid-connected doubly fed induction generator (DFIG) based wind-turbine system under unbalanced grid voltage condition. The method produces required rotor voltage references based on the sliding mode control (SMC) approach in stationary reference frame, without the requirement of synchronous coordinate...
متن کامل