Toxicity of leachate from bottom ash in a road construction.

نویسندگان

  • Solvita Ore
  • Jelena Todorovic
  • Holger Ecke
  • Kerstin Grennberg
  • Sofia Lidelöw
  • Anders Lagerkvist
چکیده

A test road constructed with municipal solid waste incineration (MSWI) bottom ash was monitored over a period of 36 months. Using chemical and toxicological characterisation, the environmental impact of leachates from bottom ash was evaluated and compared with leachates from gravel used as reference. Initial leaching of Cl, Cu, K, Na, NH4-N and TOC from bottom ash was of major concern. However, the quality of the bottom ash leachate approached that of the gravel leachate with time. Leachates from the two materials were compared regarding the concentration of pollutants using multivariate data analyses (MVDA). A standardized luminescent bacteria assay using Vibrio fischeri did not show any toxicity, most likely because saline contamination can mask the toxic response and stimulate luminescence in these marine bacteria. A mung bean assay using Phaseolus aureus revealed that the toxicity of bottom ash leachate collected at the very beginning of the experimental period (October 2001 and May 2002) might be attributed to the following components and their respective concentrations in mg l(-1): Al (34.2-39.2), Cl (2914-16,446), Cu (0.48-1.92), K (197-847), Na (766-4180), NH4-N (1.80-8.47), total-N (12.0-18.5), and TOC (34.0-99.0). The P. aureus assay was judged as a promising environmental tool in assessing the toxicity of bottom ash leachate.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Evaluation of Leachate Emissions from Municipal Solid Waste Incineration Bottom Ash and Crushed Rock Used in Road Construction

The use of municipal solid waste incineration (MSWI) bottom ash in road construction may possess a risk to the environment due to the release of e.g. salt and heavy metals. In this study, two years of leachate data from a test road built of MSWI bottom ash and crushed rock in northern Sweden were evaluated. It was found that Cu, Cr, Al, Na, and Clwere leached in higher amounts from the bottom a...

متن کامل

Evaluation and prediction of emissions from a road built with bottom ash from municipal solid waste incineration (MSWI).

In autumn 2001, a full-scale test road was built with municipal solid waste incineration (MSWI) bottom ash at the Dåvamyran landfill, Umeå, Northern Sweden. Leachates were collected from asphalted sections with either bottom ash or gravel as filling material. In this research, 12 months of ash leachate sampling were evaluated with respect to emissions of contaminants such as trace metals and ch...

متن کامل

Solubility and adsorption characteristics of Pb in leachate from MSW incinerator bottom ash.

The solubility and adsorption characteristics of Pb in leachate from municipal solid waste incineration (MSWI) bottom ash was studied by batch experiments. The solubility of Pb in leachate was 1-2 orders of magnitude lower than that of Pb in carbonate solutions. Adsorption experiments showed bottom ash have high adsorption capacity for Pb. To evaluate a controlling component in bottom ash, quar...

متن کامل

Cellular Mutagenicity and Heavy Metal Concentrations of Leachates Extracted from the Fly and Bottom Ash Derived from Municipal Solid Waste Incineration

Two incinerators in Taiwan have recently attempted to reuse the fly and bottom ash that they produce, but the mutagenicity of these types of ash has not yet been assessed. Therefore, we evaluated the mutagenicity of the ash with the Ames mutagenicity assay using the TA98, TA100, and TA1535 bacterial strains. We obtained three leachates from three leachants of varying pH values using the toxicit...

متن کامل

Properties of lightweight aggregate produced by rapid sintering of incinerator bottom ash

The fraction of municipal solid waste incinerator bottom ash with a particle size less than 8mm has been milled, formed into pellets and rapidly sintered in a rotary furnace at temperatures between 900 and 1080 ◦C. The effect of sintering temperature on density, water absorption and crushing strength has been determined. Sintering at temperatures between 1000 and 1050 ◦C produces pellets with p...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Waste management

دوره 27 11  شماره 

صفحات  -

تاریخ انتشار 2007