Microbial‐based motor fuels: science and technology
نویسنده
چکیده
The production of biofuels via microbial biotechnology is a very active field of research. A range of fuel molecule types are currently under consideration: alcohols, ethers, esters, isoprenes, alkenes and alkanes. At the present, the major alcohol biofuel is ethanol. The ethanol fermentation is an old technology. Ongoing efforts aim to increase yield and energy efficiency of ethanol production from biomass. n-Butanol, another microbial fermentation product, is potentially superior to ethanol as a fuel but suffers from low yield and unwanted side-products currently. In general, biodiesel fuels consist of fatty acid methyl esters in which the carbon derives from plants, not microbes. A new biodiesel product, called microdiesel, can be generated in engineered bacterial cells that condense ethanol with fatty acids. Perhaps the best fuel type to generate from biomass would be biohydrocarbons. Microbes are known to produce hydrocarbons such as isoprenes, long-chain alkenes and alkanes. The biochemical mechanisms of microbial hydrocarbon biosynthesis are currently under study. Hydrocarbons and minimally oxygenated molecules may also be produced by hybrid chemical and biological processes. A broad interest in novel fuel molecules is also driving the development of new bioinformatics tools to facilitate biofuels research.
منابع مشابه
Prevention of Biofouling in Hydrocarbons by Antimicrobial Vessel and Pipeline Coating for Cost Savings and an Increase in Safety and Reliability
Hydrocarbons are prone to bacterial and fungal contamination. Bacteria and fungi live and proliferate in water droplets within the fuels and on surfaces surrounding them. This can cause corrosion in oil exploration and production, clogging of fuel lines in aviation and higher emissions in diesel combustion engines to state few examples. State-of-the-art is the addition of biocides to fuels, whi...
متن کاملElectromagnetic Analysis of Hysteresis Synchronous Motor Based on Complex Permeability Concept
Hysteresis motor is self-starting synchronous motor that uses the hysteresis characteristics of magnetic materials to make torque. There are different methods to model this kind of motor and take into account the magnetic hysteresis characteristic of the rotor hysteresis ring. In this investigation the application of complex permeability concept is implemented to model the hysteresis loop and t...
متن کاملComparison of Conduction Based and Mediator Based Models for Microbial Fuel Cells
Microbial fuel cells (MFCs) are processes used for simultanuous bioenergy capturing and waste treatment. In this study, a model for MFCs based upon a conduction mechanism for electron transfer is proposed, which integrates substrate utilization, current production and conduction and microbial distribution and growth in batch flow mode. The outputs of the model and that of a mediator based mode...
متن کاملInvestigation of SLIM Dynamic Models Based on Vector Control for Railway Applications
Although, Single-Sided Linear Induction Motor (SLIM) utilization has increased in railway applications due to their numerous advantages in comparison to Rotational Induction Motors (RIM), there are some sophistication in their mathematical models and electrical drive. This paper focuses on the problems of SLIM modeling, with assuming end-effect on the basis of Field Oriented Control (FOC) as a ...
متن کاملA Novel MRAS Based Estimator for Speed-Sensorless Induction Motor Drive
In this paper, a novel stator current based Model Reference Adaptive System (MRAS) estimator for speed estimation in the speed-sensorless vector controlled induction motor drives is presented. In the proposed MRAS estimator, measured stator current of the induction motor is considered as a reference model. The estimated stator current is produced in an adjustable model to compare with the measu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 1 شماره
صفحات -
تاریخ انتشار 2008