Contribution concerning the Processing of Experimental Data Obtained through Superfinishing of Steel
نویسندگان
چکیده
An experimental research on the fundamentals of the superfinishing process is reported here. This work presents some of the experimental results obtained for 3 types of steel, OLC 45, 13CrNi and 41MoCr11 using the superfinishing process. This work intends to present several experimental results obtained through the processing of the experimental data obtained, considering the process as a dynamic series in discreet time, because the roughness is a dynamic series formed from a multitude of n discreet for whom it exists a function x (t), its argument t representing the discreet time.
منابع مشابه
Corrugated Box Production Process Optimization Using Dimensional Analysis and Response Surface Methodology
Response surface methodology (RSM) is a statistical method useful in the modeling and analysis of problems in which the response variable receives the influence of several independent variables, in order to determine which are the conditions under which should operate these variables to optimize a corrugated box production process. The purpose of this research is to create response surface mode...
متن کاملAutomatic Detection and Localization of Surface Cracks in Continuously Cast Hot Steel Slabs Using Digital Image Analysis Techniques
Quality inspection is an indispensable part of modern industrial manufacturing. Steel as a major industry requires constant surveillance and supervision through its various stages of production. Continuous casting is a critical step in the steel manufacturing process in which molten steel is solidified into a semi-finished product called slab. Once the slab is released from the casting unit, th...
متن کاملIntegration of grey-based Taguchi technique in optimization of parameters process during the turning operation of 16MnCr5 steel
CNC turning is widely used as a manufacturing process through which unwanted material is removed to get the high degree of surface rough. In this research article, Taguchi technique was coupled with grey relation analysis (GRA) to optimize the turning parameters for simultaneous improvement of productivity, average surface roughness (Ra), and root mean square roughness (Rq).Taguchi technique L2...
متن کاملImportance of Environmental Education in the Creation of Environmental Attitude and Behavior on Solid Waste Management
When we can make emphasis on recycling and processing materials, that enough energy and materials are not available. Rapid population growth and excess urban development are a significant cause of the destruction of the environment and natural resources. To achieve sustainable development, the human need to manage the waste. One way to manage waste can be done through environmental education; o...
متن کاملGrain Size Effect on the Hot Deformation Processing Map of AISI 304 Austenitic Stainless Steel
In this study, the hot deformation processing map of AISI 304 austenitic stainless steel in two initial grain sizes of 15 and 40 μm was investigated. For this purpose, cylindrical samples were used in the hot compression test at the temperature range of 950-1100 °C and the strain rate of 0.005-0.5% s-1. At first, the relationship between the peak stress and Zener-Hollomon parameter w...
متن کامل