Implementation of a Novel Bidirectional DC-DC Converter

نویسندگان

  • M. Narender Reddy
  • Sravan Kumar
چکیده

Bidirectional Dc–Dc Converters square measure accustomed Transfer the facility Between 2 Dc Sources in Either Direction. These Converters square measure wide utilized in Applications, like Hybrid electrical Vehicle Energy Systems, Uninterrupted Power provide, Fuel-Cell Hybrid Power Systems, electrical phenomenon Hybrid Power Systems, And Battery Charge. Several bifacial Dc–Dc Converters are researched. The bifacial Dc– Dc Flyback Converters square measure additional engaging thanks to straightforward Structure and simple management. However, These Converters Suffer From High Voltage Stresses On the facility Devices thanks to the run electrical device Energy Of The electrical device. A unique of bifacial DC-DC convertor drive is bestowed during this paper. The circuit configuration of the planned convertor is extremely straightforward. The planned convertor employs a coupled electrical device with same winding turns within the primary and secondary sides. In change of magnitude mode, the first and secondary windings of the coupled electrical device square measure operated in parallel charge and series discharge to attain high change of magnitude voltage gain. In change of magnitude mode, the first and secondary windings of the coupled electrical device square measure operated nonparallel charge and parallel discharge to attain high change of magnitude voltage gain. Thus, the planned convertor has higher change of magnitude and change of magnitude voltage gains than the standard bifacial DC-DC boost/buck convertor. Beneath same electrical specifications for the planned convertor and therefore the typical bifacial boost / buck convertor, the common price of the switch current within the planned convertor is a smaller amount than the standard bifacial boost / buck convertor. The operative principle and steady-state analysis square measure mentioned well. The operative principle and steady-state analysis square measure mentioned well. Finally, a 14/42-V example circuit is enforced to verify the performance for the auto dual-battery system. Keywords-DCM, CCM, Flyback, Boost, Buck, Biface, IGBT, MOSFET, DCM, CCM

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Bidirectional DC-DC Convreter with Zero Voltage Switching Capability for Energy Storage Application

In this paper, a bidirectional DC-DC converter with high power density for energy storage application is proposed. The presented converter provides power transfer in both directions only with adjusting phase shift angle. Zero voltage switching (ZVS) in both turn on and turn off moments of all switches is the major capability of the converter that makes it suitable for high power applications. Z...

متن کامل

A Markovian Approach Applied to Reliability Modeling of Bidirectional DC-DC Converters Used in PHEVs and Smart Grids

In this paper, a stochastic approach is proposed for reliability assessment of bidirectional DC-DC converters, including the fault-tolerant ones. This type of converters can be used in a smart DC grid, feeding DC loads such as home appliances and plug-in hybrid electric vehicles (PHEVs). The reliability of bidirectional DC-DC converters is of such an importance, due to the key role of the expec...

متن کامل

Sliding Mode Control of a Bidirectional Buck/Boost DC-DC Converter with Constant Switching Frequency

In this paper, sliding mode control (SMC) for a bidirectional buck/boost DC-DC converter (BDC) with constant frequency in continuous conduction mode (CCM) is discussed. Since the converter is a high-order converter, the reduced-order sliding manifold is exploited. Because of right-half-plan zero (RHPZ) in the converter’s duty ratio to output voltage transfer function, sliding mode current...

متن کامل

Analysis and Implementation of a Novel Bidirectional DC-DC Converter

A novel bidirectional DC-DC converter is presented in this paper. The circuit configuration of the proposed converter is very simple. The proposed converter employs a coupled inductor with same winding turns in the primary and secondary sides. In step-up mode, the primary and secondary windings of the coupled inductor are operated in parallel-charge and series-discharge to achieve high step-up ...

متن کامل

A New Topology of Bidirectional Buck-Boost dc/dc Converter with Capability of Soft Switching and input Current Ripple Cancellation

In this paper, a new bidirectional buck-boost dc-dc converter with capability of soft switching and zero input current ripple is proposed. The coupled inductor is used in the proposed converter to eliminate the input current ripple. In the proposed converter, zero voltage switching (ZVS) and zero current switching (ZCS) can be obtained for the main and auxiliary switches, respectively. In addit...

متن کامل

A Novel Bidirectional DC - DC Converter with Battery Protection

This paper presents the implementation of a bidirectional dc-dc converter to protect a battery from overcharging and undercharging. The proposed converter circuit provides low voltage stresses across the switches, higher step-up and step-down voltage gains and efficiency is also high when compared to conventional boost/buck converter. The proposed control circuit controls the charging and disch...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013