Recent Research and Applications of Numerical Simulation for Dynamic Response of Long-Span Bridges Subjected to Multiple Loads

نویسندگان

  • Zhiwei Chen
  • Bo Chen
چکیده

Many long-span bridges have been built throughout the world in recent years but they are often subject to multiple types of dynamic loads, especially those located in wind-prone regions and carrying both trains and road vehicles. To ensure the safety and functionality of these bridges, dynamic responses of long-span bridges are often required for bridge assessment. Given that there are several limitations for the assessment based on field measurement of dynamic responses, a promising approach is based on numerical simulation technologies. This paper provides a detailed review of key issues involved in dynamic response analysis of long-span multiload bridges based on numerical simulation technologies, including dynamic interactions between running trains and bridge, between running road vehicles and bridge, and between wind and bridge, and in the wind-vehicle-bridge coupled system. Then a comprehensive review is conducted for engineering applications of newly developed numerical simulation technologies to safety assessment of long-span bridges, such as assessment of fatigue damage and assessment under extreme events. Finally, the existing problems and promising research efforts for the numerical simulation technologies and their applications to assessment of long-span multiload bridges are explored.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimization of the TMD Parameters to Suppress the Vertical Vibrations of Suspension Bridges Subjected to Earthquake Excitations

Flexible structures (such as long-span suspension bridges which undergo wind or earthquake excitations) exhibit complex dynamic behavior. Due to high cost of strengthening such structures, as well as the technological advances in recent years, much attention has been given to using innovative means of enhancing structural functionality and safety against natural hazards. Among the methods used ...

متن کامل

Numerical Simulation of Piles Subjected To Lateral Spreading and Comparison with Shaking Table Results

Pile foundations are relatively vulnerable to lateral loads. During liquefaction-induced lateral spreading, this vulnerability is particularly conspicuous due to a loss of strength and stiffness in the liquefied soil. A nonlinear effective stress analysis incorporating an elastoplastic constitutive model based on Finite Difference Method (FLAC2D program) was used to numerically simulate shake t...

متن کامل

Dynamic impact analysis of long span cable-stayed bridges under moving loads

The aim of this paper is to investigate the dynamic response of long span cable-stayed bridges subjected to moving loads. The analysis is based on a continuum model of the bridge, in which the stay spacing is assumed to be small in comparison with the whole bridge length. As a consequence, the interaction forces between the girder, towers and cable system are described by means of continuous di...

متن کامل

Investigating the effect of pseudo-static components on bridge structures under multiple support excitations using conditional simulated records

Long-span bridges, as vital structures, play a very important role in economic development. Furthermore, the results of several earthquake-damaged bridges showed that their seismic behavior was different from that predicted under uniform excitation and in some cases the responses were more than predicted results. Therefore, the damaged bridges under non-uniform excitations were re-analyzed and ...

متن کامل

Fatigue Life Assessment of Composite Airplane Wing Subjected to Variable Mechanical and Thermal Loads

The purpose of this paper is to estimate the fatigue life of an airplane wing with laminated composite skin, subjected to variable mechanical and thermal loads. To achieve this aim,at first, the three-dimensional model of airplane wing was drawn in CATIA software. Then, by transferring the model to the ABAQUS software, the finite element model of the wing wascreated. H...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 2014  شماره 

صفحات  -

تاریخ انتشار 2014