An Ultra-Low-Voltage and Ultra-Low-Power 2.4 GHz LNA Design
نویسندگان
چکیده
In this paper, ultra-low-voltage and ultra-lowpower circuit techniques are presented for CMOS RF front-ends. By employing a modified current-reused architecture, the low-noise amplifier (LNA) can operate at a very low supply voltage with microwatt power consumption while maintaining reasonable circuit performance at 2.4 GHz. Using a TSMC 0.18 um CMOS process, from the simulation results, the fully integrated LNA exhibits a gain of 14.4 dB and a noise figure of 1.6 dB at 2.4 GHz, operated at a supply voltage of 0.9 V, the input matching (S11) is –18.1 dB while consumes only 960 μW. example.
منابع مشابه
A Broadband Low Power CMOS LNA for 3.1–10.6 GHz UWB Receivers
A new approach for designing an ultra wideband (UWB) CMOS low noise amplifier (LNA) is presented. The aim of this design is to achieve a low noise figure, reasonable power gain and low power consumption in 3.1-10.6 GHz. Also, the figure of merit (FOM) is significantly improved at 180nm technology compared to the other state-of-the-art designs. Improved π-network and T-network are used to obt...
متن کاملA New Ultra-Wideband Low Noise Amplifier With Continuous Gain Control
This paper presents a new variable gain low noise amplifier (VG-LNA) for ultra-wideband (UWB) applications. The proposed VG-LNA uses a common-source (CS) with a shunt-shunt active feedback as an input stage to realize input matching and partial noise cancelling. An output stage consists of a gain-boosted CS cascode and a gain control circuit that moves the high resonant frequency to higher freq...
متن کاملForward Body Biasing Technique in Current Folded CMOS LNA in Subthreshold Region for Biomedical Applications
A CMOS low noise amplifier with current folded technique has been proposed for ultra-low voltage, ultra-low power biomedical applications. The target frequency is 2.4 GHz and the proposed LNA is implemented in standard 65 and 90 nm CMOS technologies. By exploiting forward body biasing technique in current folded architecture, the LNA is biased in subthreshold region with supply voltage of 350 m...
متن کاملDesign of a New Low-Power 2.4 GHz CMOS LNA
A 2.4-GHz single-stage CMOS low noise amplifier (LNA) structure with ultra low power consumption is proposed. A current reuse technique is used to decrease power dissipation with increasing amplifier transconductance for the LNA. Thus, the same amplifier transconductance for the LNA will be achieved at decreased power dissipation. Also, due to the use of an inverter-type amplifier which has a s...
متن کاملDesign and implementation of ultra-wide-band CMOS LC ilter LNA 215 Design and implementation of ultra-wide-band CMOS LC ilter LNA
Demand for low cost and high data-rate wireless communication systems is increasing. Since the FCC has authorized communication in the 3.1 GHz to 10.6 GHz frequency band, several technologies have been developed to satisfy the communication market. Typically, Orthogonal Frequency Division Multiplexing (OFDM) technique appears to be good candidate for high speed data communication whereas carrie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009