A New Optically Reflective Thin Layer Electrode (ORTLE) Window: Gold on a Thin Porous Alumina Film Used to Observe the Onset of Water Reduction

The fabrication and unique characteristics of a new type of thin layer electrode, an optically reflective thin layer electrode (ORTLE), are described. The electrode was fabricated by the anodization of a thin layer of aluminum sputtered onto a plain glass microscope slide to create a 750 nm-thick porous alumina film. A thin film of gold was then sputtered atop the porous and transparent alumina film. The gold layer remained porous to allow solution into the pores but was optically thick and reflective. Reflectance measurements made through the microscope slide did not interrogate the bulk solution, but show spectral features that shift with the optical properties of the material filling the pores of the alumina film. A simple series of experiments, in which the potential of the ORTLE was stepped negatively to various values in an aqueous sodium sulfate solution, shows that interference fringes shift measurably in the ORTLE spectrum at potentials several hundred millivolts positive of the potential at which gas evolution was visible to the naked eye.