Nickel and cobalt release from metal alloys of tools--a current analysis in Germany.

نویسندگان

  • Anja Kickinger-Lörsch
  • Thomas Bruckner
  • Vera Mahler
چکیده

BACKGROUND The former 'EU Nickel Directive' and, since 2009, the REACH Regulation (item 27 of Annex XVII) do not include all metallic objects. The nickel content of tools is not regulated by the REACH Regulation, even if they may come into in prolonged contact with the skin. Tools might be possible sources of nickel and cobalt sensitization, and may contribute to elicitation and maintenance of hand eczema. OBJECTIVES To perform a current analysis of the frequency of nickel or cobalt release from new handheld tools purchased in Germany. METHODS Six hundred unused handheld tools from the German market were investigated with the dimethylglyoxime test for nickel release and with disodium-1-nitroso-2-naphthol-3,6-disulfonate solution for cobalt release. RESULTS Nickel release was detected in 195 of 600 (32.5%) items, and cobalt in only six (1%) of them. Positive nickel results were nearly twice as frequent in tools 'made in Germany' than in tools without a mark of origin. Tools made in other European countries did not release nickel. Cobalt release was only found in pliers and a saw. A correlation was found between price level and nickel release. Among toolkits, 34.2% were inhomogeneous concerning nickel release. CONCLUSION The German market currently provides a large number of handheld tools that release nickel, especially tools 'made in Germany'. For consumer protection, it seems appropriate to include handheld tools in the REACH Regulation on nickel.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A review of the requirements and hazards of toxic metals from orthodontic wires

Background: Orthodontics is a part of dentistry that includes preventive methods and correction of dental irregularities that need to be repositioned by functional and mechanical tools to provide an ideal occlusion and a beautiful face for patients. There are currently four metal arch wires used in orthodontic treatment: stainless steel alloy, cobalt-chromium alloy, nickel-titanium alloy, and b...

متن کامل

In vivo study on metal release from fixed orthodontic appliances in oral mucosa cells

In vivo study on metal release from fixed orthodontic appliances in oral mucosa cells Dr. F. Amini* - Dr. M. Rabbani** - Dr. A. Amjadei*** *- Assistant Professor of Orthodontics Dept. - Faculty of Dentistry – Islamic Azad University (Tehran). **- Assistant Professor, Nuclear Research Center Dept. Iranian Atomic Energy Organ. ***- Dentist. Background and Aim: Fixed orthodontic appliances usually...

متن کامل

In vitro element release and biological aspects of base–metal alloys for metal-ceramic applications

Objective: The aims of this study were to investigate the release of element from, and the biological response in vitro to, cobalt-chromium alloys and other base-metal alloys used for the fabrication of metal-ceramic restorations. Material and methods: Eighteen different alloys were investigated. Nine cobalt-chromium alloys, three nickel-chromium alloys, two cobalt-chromium-iron alloys, one pal...

متن کامل

Failure of total hip implants: metals and metal release in 52 cases.

BACKGROUND The pathogenesis of total joint replacement failure is multifactorial. One hypothesis suggests that corrosion and wear of alloys result in metal ion release, which may then cause sensitization and even implant failure, owing to the acquired immune reactivity. OBJECTIVES To assess cobalt, nickel and chromium(VI) release from, and the metal composition of, failed metal-on-ethylene to...

متن کامل

[Mechanical properties of metal-ceramic systems from nickel-chromium and cobalt-chromium alloys].

BACKGROUND/AIM Metal-ceramic bond strength and alloys' elastic modulus clearly determine the potential of alloy application, because the ceramic integrity during mastication depends on these two characteristics. The aim of this study was to evaluate metal-ceramic bond strenght and elastic modulus of cobalt-chromium alloys in making porcelain-fused-to-metal restorations, regarding the applicatio...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Contact dermatitis

دوره 73 5  شماره 

صفحات  -

تاریخ انتشار 2015