Superconducting Final FOCUS Quadrupoles for a B Factory*
نویسنده
چکیده
The superconducting final focus triplets now operating at the SLAC Linear Collider (SLC) demonstrate most of the features required for a B Factory in terms of detector interaction and high machine tolerances. --These features are discussed, together with reasonable expectations for scaling to a B Factory. The effort .and schedule for this project are discussed. -” a!,
منابع مشابه
Mitigating Radiation Loads in Nb3Sn Quadrupoles for LHC Upgrades
Challenging beam-induced energy deposition issues are addressed for the next generation of the LHC high-luminosity interaction regions based on Nb3Sn quadrupoles. Detailed MARS15 Monte Carlo energy deposition calculations are performed for various coil diameters, thicknesses and materials of the inner absorber at a field gradient of 200 T/m. It is shown that using the inner absorber made of tun...
متن کاملPermanent Magnet Quadrupoles for CESR Phase-III Upgrade
The CESR Phase-III upgrade plan includes very strong permanent magnet quadrupoles in front of the cryostat for the superconducting quadrupoles and physically as close as possible to the interaction point. Together with the superconducting quadrupoles, they provide tighter vertical focusing at the interaction point. The quadrupoles are built with Neodymium Iron Boron (NdFeB) material and operate...
متن کاملEUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH CERN - PS DIVISION PS/HP Note 99-11 Neutrino Factory Note-08 Transverse Collection of Pions
The early stages of a neutrino factory are critical to fulfill physics requirements in the final muon storage ring. The transverse collection of pions behind the target is therefore a crucial feature for which different options exist. In this article, two collection systems using either quadrupoles or a transition solenoid between the target and the downstream channel are studied. The transitio...
متن کاملLhc Inner Triplet Powering Strategy
In order to achieve a luminosity in excess of 10 cms at the Large Hadron Collider (LHC), special high gradient quadrupoles are required for the final focusing triplets. These low-β triplets, located in the four experimental insertions (ATLAS, CMS, ALICE, LHC-B), consist of four wide-aperture superconducting magnets: two outer quadrupoles, Q1 and Q3, with a maximum current of 7 kA and a central ...
متن کاملThe Superconducting Interaction Region Magnet Positioning System for the CESR Phase III Upgrade
Due to the extraordinary sensitivity of beams to misalignments of the superconducting high gradient interaction region magnets for the Phase III upgrade, a beam-based alignment and active positioning scheme has been designed and is being constructed. Using cams and kinematic mounting, the magnetic centers of the four quadrupole magnets will be independently positioned over a radial range of 1 m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1998