Framework for link reliability in inter-working multi-hop wireless networks
نویسندگان
چکیده
With the increase in deployment of multi-hop wireless networks and the desire for seamless internet access through ubiquitous connectivity, the inter-working of heterogeneous multi-hop wireless networks will become prominent in the near future. To complement the quest for ubiquitous service access, multi-mode mobile terminals are now in existence. Inter-working heterogeneous multi-hop wireless networks can provide seamless connectivity for such multi-mode nodes but introduces a number of challenges due to its dynamic network topology. One of the challenges in ensuring seamless access to service through these terminals in an inter-working environment is the selection of reliable wireless point-to-point links by the multi-hop nodes. A wireless link is said to be reliable if its radio attribute satisfies the minimum requirements for successful communication. Successful communication is specified by metrics such as signal to interference and noise ratio (SINR), probability of bit error etc. However, the multi-hop wireless networks being inter-worked may operate with different link layer protocols. Therefore, how can the reliability of a wireless link be estimated irrespective of the link level technologies implemented in the networks being inter-worked so that optimal paths can be used for multi-hopping between nodes? In this paper, a generic framework which can estimate the reliability of a link in inter-working multi-hop wireless network is presented. The framework uses the relationship between inter-node interference, SINR and the probability of bit error to determine the reliability of a wireless link between two nodes. There is a threshold for the probability of bit error on a link for the link to be termed reliable. Using parameters such as the SINR threshold, nodes’ transmission power, link distance and interfering node density, the framework can evaluate the reliability of a link in an interworking multi-hop network. © 2010 Elsevier Ltd. All rights reserved.
منابع مشابه
Analysis of Route Availability in Inter-working Multi-hop Wireless Networks
In order to link a source-destination node pair in inter-working multi-hop wireless networks, links or routes must first be available. It is only after establishing the availability of links and routes between nodes that factors which affect connectivity e.g. interference can be considered. Connectivity in multi-hop wireless networks has been studied. However, the studies focused on network con...
متن کاملA Connectivity Model for Inter-working Multi-hop Wireless Networks
In inter-working multi-hop wireless networks, establishing resilient connectivity between source-destination node pairs is a major issue. The issues of connectivity in multihop wireless networks have been studied. However these analyses focused on network connectivity in ad-hoc networks. Since the next generation of wireless networks will be inter-working, an understanding of connectivity as it...
متن کاملA Framework for Connectivity in Inter-working Multi-hop Wireless Networks
Establishing connectivity between node pairs in inter-working multihop wireless networks is a challenge. Although connectivity in multi-hop wireless networks has been studied yet these analyses focused mainly on ad-hoc networks. Since the next generation of wireless networks will be inter-working, an understanding of connectivity as it applies to such networks is needed. Specifically, this rese...
متن کاملA Model for Interference on Links in Inter-working Multi-hop Wireless Networks
Inter-node interference is an important performance metric in interworking multi-hop wireless networks. Such interference results from simultaneous transmissions by the nodes in these networks. Although several interference models exist in literature, these models are for specific wireless networks and MAC protocols. Due to the heterogeneity of link-level technologies in interworking multi-hop ...
متن کاملEnergy Efficiency and Reliability in Underwater Wireless Sensor Networks Using Cuckoo Optimizer Algorithm
Energy efficiency and reliability are widely understood to be one of the dominant considerations for Underwater Wireless Sensor Networks (UWSNs). In this paper, in order to maintain energy efficiency and reliability in a UWSN, Cuckoo Optimization Algorithm (COA) is adopted that is a combination of three techniques of geo-routing, multi-path routing, and Duty-Cycle mechanism. In the proposed alg...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Mathematical and Computer Modelling
دوره 53 شماره
صفحات -
تاریخ انتشار 2011