Photonic Integrated Circuit for All-Optical Millimeter-Wave Signal Generation
نویسنده
چکیده
Generation of millimeter-wave electronic signals and power is required for highfrequency communication links, RADAR, remote sensing and other applications. However, in the 30 to 300 GHz mm-wave regime, signal sources are bulky and inefficient. All-optical generation of mm-wave signals promises to improve efficiency to as much as 30 to 50 percent with output power as high as 100 mW. All of this may be achieved while taking advantage of the benefits of monolithic integration to reduce the overall size to that of a single semiconductor chip only a fraction of a square centimeter in size. This report summarizes the development of the first monolithically integrated all-optical mm-wave signal generator ever built. The design integrates a mode-locked semiconductor ring diode laser with an optical amplifier and high-speed photodetector into a single optical integrated circuit. Frequency generation is demonstrated at 30, 60 and 90 Ghz.
منابع مشابه
Millimeter-Wave Photonic Techniques: Part III- Modulation and Demodulation Schemes and System Integration Based on Substrate Integrated Circuits
The techniques to implement radio over fiber (RoF) systems using optical subcarrier modulation (SCM) and dense wavelength division multiplexing (DWDM) are reviewed, which include the techniques of SCM, millimeter-wave (mm-wave) generation and reception at base stations, and optical multiplexing/demultiplexing. The impact of system nonlinear distortions and their suppression are also reviewed. I...
متن کاملOptoelectronic comb generation and cross-injection locking of photonic integrated circuit for millimetre-wave generation
We demonstrate how a monolithically integrated heterodyne source was used for a 33.6 GHz signal generation using an optical solution by a combination of cross-optical injection locking inside the chip and electrical injection locking at the RF signal 7th sub-harmonic.
متن کاملUltra-Fast All-Optical Half Subtractor Based on Photonic Crystal Ring Resonators
Abstract: In this paper, we aim to design and propose a novel structure for all-opticalhalf subtractor based on the photonic crystal. The structure includes two optical switches,one power splitter, and one power combiner. The optical switches are made of theresonant rings which use the nonlinear rods for dropping operation. The footprint of thedesigned structure is about...
متن کاملMillimeter-Wave Photonic Techniques: Part I-Photonic Generation of Millimeter-Wave Signals
Broadband, low loss and cost-effective transmission capability of optical fiber links has led to an ever-increasing interest in their use for the generation and distribution of millimeter-wave (mm-wave) signals for broadband wireless access networks and sensor networks. In this paper, some new techniques in photonic generation of mm-wave signals for radio-over-fiber (RoF) network applications a...
متن کاملPhotonic Hybrid Precoding for Millimeter Wave RoF Systems
Large propagation path loss and limited scattering of millimeter wave (mmwave) channels create new challenges for physical layer signal processing. Hence, in this article, we propose a photonic hybrid precoding model for mmwave radio-over-fiber systems that overcomes hardware constraints on radio frequency precoding. With help of silicon photonic integrated circuits (Si-PICs), the photonic prec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1997