Simulation System of Multistage Hot Rolling Process of Flat Products
نویسنده
چکیده
The properties of each deformed product are decisively influenced by production process. By means of directed control of the various steps of process it is possible to obtain the desired properties. In order to reach this purpose and to estimate the properties of the end product the whole process chain must be presented as the whole set. This integrated approach starts with the solidified melt and following the each production stage from the transport and deformation phase up to the end product. In order to increase constantly quality and quantity demands already on the stage of planning and also during the production, the models with appropriate software can be used, which allow to predict the local and global processes in interactive connection. For this reason it is necessary to develop a tool that is enough precise and reliable for a variety of materials (steel, non iron and other alloyed materials) as they are being deformed at the various stages. In addition this instrument must offer an opportunity to calculate the processes approximately in real time.
منابع مشابه
Numerical Simulation of the Effect of Elastic Deformation of work rolls on the rolling force and Comparison with the Results obtained by the Slab Method during the reciprocating cold rolling
Cold rolling process of a major transformation in the form of sheet metal and a wide range of steel products are produced in this way. Elastic deformation during cold rolling working rollers and the inevitable increase in the rolling force. In this study, the effect of elastic deformation during cold rolling mill rollers working on the reciprocating back and forth in tandem with the presence of...
متن کاملNumerical Simulation of the Effect of Elastic Deformation of work rolls on the rolling force and Comparison with the Results obtained by the Slab Method during the reciprocating cold rolling
Cold rolling process of a major transformation in the form of sheet metal and a wide range of steel products are produced in this way. Elastic deformation during cold rolling working rollers and the inevitable increase in the rolling force. In this study, the effect of elastic deformation during cold rolling mill rollers working on the reciprocating back and forth in tandem with the presence of...
متن کاملAn Investigation on the Softening Mechanism of 5754 Aluminum Alloy during Multistage Hot Deformation
Isothermal interrupted hot compression tests of 5754 aluminum were conducted on a Gleeble-3500 thermo-mechanical simulator at temperatures of 350 °C and 450 °C, and strain rates of 0.1 s−1 and 1 s−1. To investigate the metadynamic recrystallization behavior, a range of inter-pass delay times (5–60 s) was employed. These tests simulated flat rolling to investigate how softening behaviors respond...
متن کاملEvaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading
The defect in work rolls directly influence the forming cost and the final shape of the product. The researchers tend to investigate the thermo-mechanical stress in work roll of rolling machines. These stresses may reduce the roll life. Since the investigation of the thermo-mechanical stress in work roll with real-conditions is complex, comprehensive studies by means of numerical methods are av...
متن کاملInvestigating the effect of hot water consumption profile on the performance of solar water heating systems
In this paper, a forced circulation solar water heater system is simulated for different hot water consumption profiles using flat plate collectors as well as evacuated tube collectors. The profiles studied are the actual samples of hot water consumption profiles for different commercial centers and institutions. Dynamic simulation outputs of system thermal performance are used as economic anal...
متن کامل