An ex vivo biomechanical evaluation of an inflatable bone tamp used in the treatment of compression fracture.

STUDY DESIGN Ex vivo biomechanical study using osteoporotic cadaveric vertebral bodies. OBJECTIVES To determine if the inflatable bone tamp (tamp) restores height to compressed vertebral bodies and to compare the biomechanical properties of isolated, fractured osteoporotic vertebral bodies treated by kyphoplasty (tamp) or vertebroplasty. SUMMARY OF BACKGROUND DATA Previous biomechanical studies have shown that vertebroplasty increases vertebral body strength and restores vertebral body stiffness, but does not restore vertebral body height lost as a result of compression fracture. METHODS Compression fractures were experimentally created in 16 osteoporotic VBs assigned to either the tamp or percutaneous vertebroplasty group. The tamp treatment consisted of inserting balloon-like devices into the vertebral body, inflating the bone tamp, and filling the void with Simplex P (Howmedica, Rutherford, NJ) bone cement. The percutaneous vertebroplasty treatment consisted of directly injecting Cranioplastic bone cement (CMW, Blackpool, UK) into the vertebral body. Pre- and posttreatment heights were measured, and the repaired vertebral bodies were recompressed to determine posttreatment strength and stiffness values. RESULTS The tamp treatment resulted in significant restoration (97%) of vertebral body height lost after compression, whereas percutaneous vertebroplasty treatment resulted in a significantly lower restoration of lost height (30%) (P < 0.05). Both treatments resulted in significantly stronger vertebral bodies relative to their initial state (P < 0.05). The tamp treatment restored vertebral body stiffness to initial values, but the percutaneous vertebroplasty treatment did not (P < 0.05). CONCLUSIONS Tamp treatment resulted in significantly greater height restoration than did percutaneous vertebroplasty, without loss of vertebral body strength or stiffness.