The kinematics of bend-induced mixing in micro-conduits
نویسندگان
چکیده
The absence of turbulence and the difficulty associated with introducing moving components into microfluidic systems make the mixing problem in microdevices challenging. We studied steady, laminar, incompressible flow through a sequence of conduits with rectangular cross-sections aligned to form 90o with each other. The feasibility of taking advantage of bend-induced vortices to stir the fluid and enhance the mixing process was evaluated theoretically and experimentally. Since at very low Reynolds numbers the bendinduced vortices decay rapidly, it was necessary to utilize a large number of bends to achieve the desired effects. Since it is not practical to directly simulate the flow through a large number of bends, we borrowed Jones et. al.'s (1989) idea of constructing a two-dimensional map to project fluid particles from a cross-section upstream of the bend to a cross-section downstream of the bend. This map was then applied repetitively to trace particle trajectories in various bend arrangements. Under certain conditions, chaotic advection was predicted. A prototype of a stirrer was fabricated with low temperature co-fired ceramic tapes.
منابع مشابه
Rapid mixing of Newtonian and non-Newtonian fluids in a three-dimensional micro-mixer using non-uniform magnetic field
The mixing of Newtonian and non-Newtonian fluids in a magnetic micro-mixer was studied numerically using ferrofluid. The mixing process was performed in a three-dimensional steady-state micro-mixer. A magnetic source was mounted at the entrance of the micro-channel to oscillate the magnetic particles. The effects of electric current, inlet velocity, size of magnetic particles, and non-Newtonia...
متن کاملGas Mixing Simulation in a T-Shape Micro Channel Using The DSMC Method
Gas mixing in a T-shape micro mixer has been simulated using the Direct Simulation Monte Carlo (DSMC) method. It is considered that the adequate mixing occurs when the mass composition of the species, CO or N2, deviates below 1 % from their equilibrium composition. The mixing coefficient is defined as the ratio of the mixing length to the main channel’s height. As the inlet Kn increases, while ...
متن کاملInvestigating Fluid Mixing in Electro-Osmotic Flow Through Passive Micro-Mixers Having Square and Triangle Barriers
Objective: In this article, a numerical study is conducted on mixing of two fluids in the liquid phase with two different concentrations of a chemical species in the electro-osmotic flow. Methods: The base liquid is an electrolyte which flows in a two-dimensional micro-channel having electrically charged walls. Lorentz electric force, which is used as stimulating flow factor, is created by appl...
متن کاملInvestigating Fluid Mixing in Electro-Osmotic Flow Through Passive Micro-Mixers Having Square and Triangle Barriers
Objective: In this article, a numerical study is conducted on mixing of two fluids in the liquid phase with two different concentrations of a chemical species in the electro-osmotic flow. Methods: The base liquid is an electrolyte which flows in a two-dimensional micro-channel having electrically charged walls. Lorentz electric force, which is used as stimulating flow factor, is created by appl...
متن کاملNumerical Investigation of Fluid Mixing in a Micro-Channel Mixer with Two Rotating Stirrers by Using the Incompressible SPH Method
Fluid mixing is a crucial and challenging process for microfluidic systems, which are widely used in biochemical processes. Because of their fast performance, active micromixers that use stirrer blades are considered for biological applications. In the present study, by using a robust and convenient Incompressible Smoothed Particle Hydrodynamics (ISPH) method, miscible mix...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016