Elimination of pump-induced frequency jitter on fiber-laser frequency combs.
نویسندگان
چکیده
Optical frequency combs generated by femtosecond fiber lasers typically exhibit significant frequency noise that causes broad optical linewidths, particularly in the comb wings and in the carrier-envelope offset frequency (f(ceo)) signal. We show these broad linewidths are mainly a result of white amplitude noise on the pump diode laser that leads to a breathing-like motion of the comb about a central fixed frequency. By a combination of passive noise reduction and active feedback using phase-lead compensation, this noise source is eliminated, thereby reducing the f(ceo) linewidth from 250 kHz to <1 Hz. The in-loop carrier-envelope offset phase jitter, integrated to 100 kHz, is 1.3 rad.
منابع مشابه
Fiber-laser frequency combs with subhertz relative linewidths.
We investigate the comb linewidths of self-referenced, fiber-laser-based frequency combs by measuring the heterodyne beat signal between two independent frequency combs that are phase locked to a common cw optical reference. We demonstrate that the optical comb lines can exhibit instrument-limited, subhertz relative linewidths across the comb spectra from 1200 to 1720 nm with a residual integra...
متن کاملOptimally coherent Kerr combs generated with crystalline whispering gallery mode resonators for ultrahigh capacity fiber communications.
Optical Kerr frequency combs are known to be effective coherent multiwavelength sources for ultrahigh capacity fiber communications. These combs are the frequency-domain counterparts of a wide variety of spatiotemporal dissipative structures, such as cavity solitons, chaos, or Turing patterns (rolls). In this Letter, we demonstrate that Turing patterns, which correspond to the so-called primary...
متن کاملReference-free, high-resolution measurement method of timing jitter spectra of optical frequency combs
Timing jitter is one of the most important properties of femtosecond mode-locked lasers and optical frequency combs. Accurate measurement of timing jitter power spectral density (PSD) is a critical prerequisite for optimizing overall noise performance and further advancing comb applications both in the time and frequency domains. Commonly used jitter measurement methods require a reference mode...
متن کاملDual-pump frequency comb generation in normally dispersive optical fibers
We show that tunable frequency combs can be generated by launching two continuous-wave pumps at slightly different wavelengths into a normally dispersive optical fiber. The dual-pump configuration allows the tuning of comb spacing into the terahertz regime. Different pump powers and frequency separations are explored numerically to determine the effect of the input parameters on frequency comb ...
متن کاملMicroresonator-based comb generation without an external laser source.
We demonstrate a fiber-microresonator dual-cavity architecture with which we generate 880 nm of comb bandwidth without the need for a continuous-wave pump laser. Comb generation with this pumping scheme is greatly simplified as compared to pumping with a single frequency laser, and the generated combs are inherently robust due to the intrinsic feedback mechanism. Temporal and radio frequency (R...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Optics letters
دوره 31 13 شماره
صفحات -
تاریخ انتشار 2006