System failure

نویسندگان

  • Jake Chapman
  • Ray Ison
  • Dick Morris
  • Chris Blackmore
چکیده

As the publisher of this work, Demos has an open access policy which enables anyone to access our content electronically without charge. We want to encourage the circulation of our work as widely as possible without affecting the ownership of the copyright, which remains with the copyright holder. Users are welcome to download, save, perform or distribute this work electronically or in any other format, including in foreign language translation without written permission subject to the conditions set out in the Demos open access licence which you can read here. Please read and consider the full licence. The following are some of the conditions imposed by the licence: • Demos and the author(s) are credited; • The Demos website address (www.demos.co.uk) is published together with a copy of this policy statement in a prominent position; • The text is not altered and is used in full (the use of extracts under existing fair usage rights is not affected by this condition); • The work is not resold; • A copy of the work or link to its use online is sent to the address below for our archive. By downloading publications, you are confirming that you have read and accepted the terms of the Demos open access licence. You are welcome to ask for permission to use this work for purposes other than those covered by the Demos open access licence.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fuzzy Reliability Evaluation of a Repairable System with Imperfect Coverage, Reboot and Common-cause Shock Failure

In the present investigation, we deal with the reliability characteristics of a repairable system consisting of two independent operating units, by incorporating the coverage factor. The probability of the successful detection, location and recovery from a failure is known as the coverage probability. The reboot delay and common cause shock failure are also considered. The times to failure of t...

متن کامل

Reliability Analysis of Redundant Repairable System with Degraded Failure

This investigation deals with the transient analysis of the machine repair system consisting of M-operating units operating under the care of single repairman. To improve the system reliability/availability, Y warm standby and S cold standby units are provided to replace the failed units. In case when all spares are being used, the failure of units occurs in degraded fashion. In such situation ...

متن کامل

بهینه‌سازی فواصل بازرسی برای یک سیستم دو مولفه‌ای پیچیده

In this paper, optimization of periodic inspection interval for a two-component system with failure dependency is presented. Failure of the first component is soft, namely, it does not cause the system stop, but it increases the system operating costs. The second component’s failure is hard, i.e. as soon as it occurs, the system stops operating. Any failure of the second component increases the...

متن کامل

بهینه‌سازی فواصل بازرسی برای یک سیستم دو مولفه‌ای پیچیده

In this paper, optimization of periodic inspection interval for a two-component system with failure dependency is presented. Failure of the first component is soft, namely, it does not cause the system stop, but it increases the system operating costs. The second component’s failure is hard, i.e. as soon as it occurs, the system stops operating. Any failure of the second component increases the...

متن کامل

RELIABILITY MEASURES AND SENSITIVITY ANALYSIS OF A COMPLEX MATRIX SYSTEM INCLUDING POWER FAILURE

This paper investigates the reliability characteristics of a complex system having nine subsystems arranged in the form of 3x3 matrix in which each row contains three subsystems. The configuration of the row is of the type 2-out-of-3: F. Each subsystem has n units connected in series. The system fails if any one row containing three subsystems fails. The considered system analyzed incorporating...

متن کامل

Impact of Human Error Modeling on Failure Rate and Optimum Routine Test Interval of Protection System

Power systems should have acceptable reliability in order to operate properly. Highly available and dependable protective relays help to obtain the desirable reliability. The relays should be periodically evaluated during specific intervals to achieve the mentioned characteristics. The Routine Test Interval (RTI) should be optimized in order to economically maximize the reliability of the prote...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003