Thermal Imaging for the Analysis of Energy Balance during Crack Propagation
نویسنده
چکیده
Earlier [ 1] we described an experimental procedure aimed at exarnining the spatial and temporal distribution of energy dissipation during crack initiation and propagation in a ductile polymer. The experiment combines a table-top tensile tester and an infrared imaging system. Because of the intense heating of the crack tip region, direct observation of the temperature rise not only provides an accurate measurement of the position of the crack tip, and thus the propagation velocity, but also much information for the analysis of plastic deformation, energy conversion, and evaluation ofthermal properties of polymer materials. In the present paper, we will present an analysis of the energy balance in such measurements.
منابع مشابه
A New Sensitivity Study of Thermal Stress Distribution for a Planar Solid Oxide Fuel Cell
Converting chemical energy into electricity is done by an electro-chemical device known as a fuel cell. Thermal stress is caused at high operating temperature between 700 oC to 1000 oC of SOFC. Thermal stress causes gas escape, structure variability, crack initiation, crack propagation, and cease operation of the SOFC before its lifetime. The aim of this study is to presen...
متن کاملPart A- Experimental: Experimental Analysis of Crack Propagation in Pre-stressed Concrete Sleepers by Fracture Mechanics
This study investigates propagation of mode I crack in B70 pre-stressed concrete sleepers by fracture mechanics approach. A new experimental analysis is done for notched B70 pre-stressed concrete sleepers with Replica test and image analysis. A scanning electron microscope test (SEM) and an image analysis are applied for the Replica test in order to determine crack length and crack mouth openin...
متن کاملSimulating energy method for grout-induced crack analysis of rock structures at Chadormalu mine by extended finite element method
Fracture mechanics is a vital component involved in studying the exact behavior of rock materials. Detection and assessment of the behavior of rock joints injected by grout plays an important role in numerical modelling in rock mechanic projects. The importance of mechanisms associated with initiation and propagation of cracks due to hydraulic fracturing has led to a considerable interest in in...
متن کاملOn the crack propagation modeling of hydraulic fracturing by a hybridized displacement discontinuity/boundary collocation method
Numerical methods such as boundary element and finite element methods are widely used for the stress analysis in solid mechanics. This study presents boundary element method based on the displacement discontinuity formulation to solve general problems of interaction between hydraulic fracturing and discontinuities. The crack tip element and a higher order boundary displacement collocation techn...
متن کاملCrack propagation and fracture in silicon wafers under thermal stress
The behaviour of microcracks in silicon during thermal annealing has been studied using in situ X-ray diffraction imaging. Initial cracks are produced with an indenter at the edge of a conventional Si wafer, which was heated under temperature gradients to produce thermal stress. At temperatures where Si is still in the brittle regime, the strain may accumulate if a microcrack is pinned. If a cr...
متن کامل