Condition Monitoring of Rotating Equipment Considering the Cause and Effects of Vibration: A Brief Review
نویسندگان
چکیده
Condition Monitoring of rotating equipment has been a very important aspect in the field of maintenance engineering. There are various types of condition monitoring techniques, namely: Vibration Analysis, Oil Debris Analysis, Ferrography, Temperature analysis. Among all these techniques, vibration analysis have gained much importance in the field of condition monitoring because of its accuracy in detecting faults its ability for proper diagnosis of the faults. Vibration-based condition monitoring (VCM) requires vibration measurement on each. Bearing pedestal using a number of vibration transducers and then signals processing forall the measured vibration data to identify fault(s).The Table 1 below summarises the condition monitoring techniques in brief with their merits and demerits:
منابع مشابه
Natural Frequency of Rotating Single-Walled Carbon Nanotubes with Considering Gyroscopic Effect
This paper investigates the bending vibration of rotating single-walled carbon nanotubes (SWCNTs) based on nonlocal theory. To this end, the rotating SWCNTs system modeled as a beam with a circular cross section and the Euler-Bernoulli beam theory (EBT) is applied with added effects such as rotary inertia, gyroscopic effect and rotor mass unbalance. Using nonlocal theory, two coupled sixth orde...
متن کاملEffect of Surface Energy on the Vibration Analysis of Rotating Nanobeam
In this study, the free vibration behavior of rotating nanobeam is studied. Surface effects on the vibration frequencies of nanobeam are considered. To incorporate surface effects, Gurtin–Murdoch model is proposed to satisfy the surface balance equations of the continuum surface elasticity. Differential quadrature method is employed and in order to establish the accuracy and applicability of t...
متن کاملWheelset Condition Monitoring based on pass-by vibration signals
Apart from regular wheel wear such as decreasing wheel diameters and reduced flange thicknesses and heights, wheel flats (WF) and oval wheels (or OOR, Out-Of-Roundness) are the most common wheelset problems for railway vehicles. Within the FP7 Research Project “Saferail”, APT has developed an innovative wheelset monitoring system so-called “Wheel flat and Out of Roundness Monitoring (WORM) syst...
متن کاملWheelset Condition Monitoring Based on Pass-by Vibration Signals
Apart from regular wheel wear such as decreasing wheel diameters and reduced flange thicknesses and heights, wheel flats (WF) and oval wheels (or OOR, Out-Of-Roundness) are the most common wheelset problems for railway vehicles. Within the FP7 Research Project “Saferail”, APT has developed an innovative wheelset monitoring system so-called “Wheel flat and Out of Roundness Monitoring (WORM) syst...
متن کاملVibration Analysis of a Rotating Nanoplate Using Nonlocal Elasticity Theory
The nanostructures under rotation have high promising future to be used in nano-machines, nano-motors and nano-turbines. They are also one of the topics of interests and it is new in designing of rotating nano-systems. In this paper, the scale-dependent vibration analysis of a nanoplate with consideration of the axial force due to the rotation has been investigated. The governing equation and b...
متن کامل