A novel technique for fast multiplication

نویسندگان

  • AAMIR A. FAROOQUI
  • GERHARD F. BECKHOFF
چکیده

In this paper we present the design of a new high-speed multiplication unit. The design is based on non-overlapped scanning of 3-bit ® elds of the multiplier. In this technique the partial products of the multiplicand and three bits of the multiplier are pre-calculated using only hardwired shifts. These partial products are then added using a tree of carry-save-adders, and ® nally the sum and carry vectors are added using a carry-lookahead adder. In the case of 2 s complement multiplication the tree of carry-save-adders also receives a correction output produced in parallel with the partial products. The algorithm is modelled in a hardware description language and its VLSI chip implemented. The performance of the new design is comparedwith that of other recent ones proposed in literature.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Fast and Efficient On-Line Harmonics Elimination Pulse Width Modulation for Voltage Source Inverter Using Polynomials Curve Fittings

The paper proposes an algorithm to calculate the switching angles using harmonic elimination PWM (HEPWM) scheme for voltage source inverter. The algorithm is based on curve fittings of a certain polynomials functions. The resulting equations require only the addition and multiplication processes; therefore, it can be implemented efficiently on a microprocessor. An extensive angle error analysis...

متن کامل

Development and Analysis of a Novel Multi-Mode MPPT Technique with Fast and Efficient Performance for PMSG-Based Wind Energy Conversion Systems

Wind energy is one of the most promising renewable energy resources. Due to instantaneous variations of the wind speed, an appropriate Maximum Power Point Tracking (MPPT) method is necessary for maximizing the captured energy from the wind at different speeds. The most commonly used MPPT algorithms are Tip Speed Ratio (TSR), Power Signal Feedback (PSF), Optimal Torque Control (OTC) and Hill Cli...

متن کامل

Fast Scalar Multiplication on Elliptic Curve Cryptography in Selected Intervals Suitable for Wireless Sensor Networks

In Wireless Sensor Networks (WSNs), providing a robust security mechanism with limited energy resources is very challenging because of sensor node’s limited resources (computation, bandwidth, memory). Asymmetric-key can fulfill the requirement, but if the number of nodes is large, symmetric-key cryptography is the best natural method because of its scalability. Asymmetric-key cryptography is po...

متن کامل

VHDL Implementation of Fast Multiplier based on Vedic Mathematic using Modified Square Root Carry Select Adder

In this paper, a novel technique for multiplication is presented using Vedic multiplier. Vedic multiplier uses adders and hence making fast adder will increase the overall speed for multiplication. We have done comparative analysis for multiplication using different architectures of adder. For comparison we have taken Carry Select Adder (CSA), Square Root Carry Select Adder (SQRT-CSA). We have ...

متن کامل

A New Technique for the Calculation of Colliding Vortex Rings

The present study involves a novel computational technique, regarding simultaneous use of the pseudo particle method, Poisson integral method and a special-purpose computer originally designed for molecular dynamics simulations (MDGRAPE-3). In the present calculations, the dynamics of two colliding vortex rings have been studied using the vortex method. The present acceleration technique allows...

متن کامل

A Novel Intelligent Fault Diagnosis Approach for Critical Rotating Machinery in the Time-frequency Domain

The rotating machinery is a common class of machinery in the industry. The root cause of faults in the rotating machinery is often faulty rolling element bearings. This paper presents a novel technique using artificial neural network learning for automated diagnosis of localized faults in rolling element bearings. The inputs of this technique are a number of features (harmmean and median), whic...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007