Automatic Recalibration of a Space Robot: An Industrial Prototype
نویسندگان
چکیده
We present a neural network method to calibrate automatically a commercial robot after undergoing wear or damage, which works on top of the nominal inverse kinematics embedded in its controller.
منابع مشابه
Improvement of the Reliability of Automatic Manufacture Systems by Using FTA Technique
In recent years, Many manufacturing industries for promoting their efficiency have tended to use the automatic manufacturing systems. Expanding automatic systems and to increase their complexity are representing the necessity of studying a proper functional quality and using reliable equipment in such systems more than ever. In this direction, the technique of fault tree analysis (FTA), along w...
متن کاملOptimization of fuzzy controller for an SMA-actuated artificial finger robot
The purpose of this paper is to design and optimize an intelligent fuzzy-logic controller for a three-degree of freedom (3DOF) artificial finger with shape-memory alloy (SMA) wire actuators. The robotic finger is constructed using three SMA wires as tendons to bend each phalanx of the finger around its revolute joint and three torsion springs which return the phalanxes to their original positio...
متن کاملمسیریابی حرکت روباتهای ماشینواره با روش پیشروی سریع
The Robot Motion Planning (RMP) problem deals with finding a collision-free start-to-goal path for a robot navigating among workspace obstacles. Such a problem is also encountered in path planning of intelligent vehicles and Automatic Guided Vehicles (AGVs). In terms of kinematic constraints, the RMP problem can be categorized into two groups of Holonomic and Nonholonomic problems. In the first...
متن کاملTumor Detection and Morphology Assessment in the Liver Tissue Using an Automatic Tactile Robot
In this paper an automatic examination robot was developed to improve the process of cancer detection, tumor localization and geometrical shape diagnosis. A uniformly distributed compressive load was applied to the top tissue surface and the resultant mechanical stress was measured that was employed for the tumor diagnosis task. The experimental examinations were performed on the soft tissue of...
متن کاملDesign and implementation of an automatic car turning system
In this paper, a control system is designed for automatic car turning. At first, the necessary information of car turning that were collected from the traffic bylaw, car driving training centers and traffic police are explained. Then, car turning is studied experimentally on several streets with different widths. Afterward, a proper path is designed for the automatic car turning system consider...
متن کامل