The cost of balancing a parabolic trough concentrated solar power plant in the Spanish electricity spot markets

نویسندگان

  • S. W. Channon
  • Michael Epstein
چکیده

This study presents a new dispatch model (SCSP) for a CSP plant based on a dynamic programing algorithm. The purpose is to investigate the cost of balancing a CSP plant in the Spanish electricity market. Results are presented for a parabolic plant in the Spanish market for years 2009, 2010 and 2011 using solar availability data at the Plataforma Solar, Andalucia, Spain. The variation of balancing cost with solar multiple (SM) and number of storage hours (Nh) is analysed and results for two different optimisation cases presented. The first uses day-ahead forecasts for both solar availability and market prices. The second uses day-ahead solar availability and within-day market price forecasts. Both cases are settled in the balancing market. Key results include that the balancing cost decreases with increased SM and Nh and that balancing costs can be 2.2% to 9.5% of the plants gross income. For all SM and Nh, balancing costs are a function of season, being lower in summer than winter driven by increased load-factor in summer. During the year Quarter 3 has a lower balancing cost than Quarter 2 due to a closer match between forecast and actual solar availability. Optimising against within-day prices costs more than with day-ahead prices resulting from more balancing energy traded at a less favourable price than day-ahead. It is envisaged that the numbers presented in this study will provide an aid to policy makers when constructing tariffs to support future CSP

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Numerical Investigation on Aerodynamic Coefficients of Solar Troughs Considering Terrain Effects and Vortex Shedding

Recently, increase in the cost of fossil fuels and taking into consideration the environmental effects of exploiting them, caused many researchers and governments to find some ways to make use of renewable energies more cost-effectively. Solar energy is a category of renewable energies which could be harvested via several technologies. One of the most practical methods is using parabolic trough...

متن کامل

Experimental Investigation on the Effect of Partially Metal Foam inside the Absorber of Parabolic Trough Solar Collector

In the present work the efficiency of a solar parabolic trough has been investigated experimentality. parabolic trough solar collector constitute a proven source of thermal energy for industrial process heat and power genaration. The impact of  using the partially porous media in the absorber on the efficiency of PTC (parabolic trough collector) has been investigated. The porosity of copper foa...

متن کامل

Electricity generation costs of concentrated solar power technologies in China based on operational plants

Recent years witnessed a sharp increase of CSP (concentrated solar power) plants around the world. CSP is currently at its early stage in China, with several demonstration and utility-scale plants underway. China's rising electricity demand, the severe environmental pollution from coal-fired power plants, and favorable renewable energy policies are expected to result in a large-scale CSP deploy...

متن کامل

Reducing the Cost of Energy from Parabolic Trough Solar Power Plants: Preprint

Parabolic trough solar technology is the most proven and lowest cost large-scale solar power technology available today, primarily because of the nine large commercial-scale solar power plants that are operating in the California Mojave Desert. However, no new plants have been built during the past ten years because the cost of power from these plants is more expensive than power from conventio...

متن کامل

Manufacturing a trough parabolic solar collector and predicting its theoretical performance

The aim of this research was manufacturing a parabolic trough solar collector in which reflecting surface is made of mirror steel rather than usual mirror and also predicting its theoretical performance.by adjusting planar ⩝ -shaped structures parallel to each other and welding them together, the main supporting structure was assembled and a parabolic-shape Teflon arc was installed in the apert...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015