A Nickel - Based Composite Electroplated Cathode for the - WP -
نویسنده
چکیده
* Electrochemical Society Active Member./-
منابع مشابه
SIMULATION OF NICKEL ELECTROFORMING PROCESS OF A REVOLVING PART USING FINITE ELEMENT METHOD
n this paper a finite element model has been proposed for evaluation of primary and secondary current density values on the cathode surface in nickel electroplating operation of a revolving part. In addition, the capability of presented electroplating simulation has been investigated in order to describe the electroplated thickness of the nickel sulfate solution. Nickel electroplating experi...
متن کاملQuantitative Analysis of Electroplated Nickel Coating on Hard Metal
Electroplated nickel coating on cemented carbide is a potential pretreatment technique for providing an interlayer prior to diamond deposition on the hard metal substrate. The electroplated nickel coating is expected to be of high quality, for example, indicated by having adequate thickness and uniformity. Electroplating parameters should be set accordingly for this purpose. In this study, the ...
متن کاملA Novel NDT Method for Measuring Thickness of Brush-Electroplated Nickel Coating on Ferrous Metal Sueface
Brush-electroplated nickel coating has been widely applied to repair and remanufacture ferrous metal component. Generally, the nickel coating has thickness from 0.05 mm to 0.2 mm, and it is also ferromagnetic like iorn metals. Therefore, the traditional supersonic thickness tester and eddy current thickness tester are not competent to measure the nickel coating thickness on iron or steel metal ...
متن کاملStress in electroplated gold on silicon substrates and its dependence on cathode agitation
The influence of cathode agitation on the residual stress of electroplated gold has been investigated. Using a custom-built plating cell, a periodic, reciprocating motion was applied to silicon substrates that were electroplated with soft gold. A commercially available gold sulfite solution was used to deposit the 0.6 lm thick gold films using a current density of 3.0 mA/cm and a bath temperatu...
متن کاملRedox-reversible niobium-doped strontium titanate decorated with in situ grown nickel nanocatalyst for high-temperature direct steam electrolysis.
Composite cathodes based on Sr0.94Ti0.9Nb0.1O3 (STNO) can be utilized for direct steam electrolysis; however, the insufficient electrocatalytic activity limits electrode performance and current efficiency. In this work, redox-reversible (Sr0.94)0.9(Ti0.9Nb0.1)0.9Ni0.1O3 (STNNO) with A-site deficiency and B-site excess has been designed as a cathode material in an oxide-ion-conducting solid oxid...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003