Suggestions for more effective rail crossing lights.
نویسنده
چکیده
منابع مشابه
Evaluating the Impact of Grade Crossing Safety Factors through Signal Detection Theory
The purpose of this effort was to apply signal detection theory to descriptively model the impact of five grade crossing safety factors to understand their effect on driver decision making. The safety factors consisted of: improving commercial motor vehicle driver safety through federal regulations, increasing locomotive conspicuity with alerting lights, increasing locomotive conspicuity with r...
متن کاملAttitudes of Iranians toward the Becker Proposition
This paper evaluates attitudes of Iranians toward crossing red traffic lights and their sensitivity to fines. Economic theory of crime under expected utility predicts that because of the possibility of severe punishments, risk adverse individuals would not cross red lights. This is implied by the Becker proposition. However, among 262 individuals surveyed, more than half of the sample has previ...
متن کاملIdentifying at Highway-Rail Grade Crossing Hotspots in Canada
This research presents a risk-based Hotspots identification model at highway-rail grade crossings in Canada. Two sets of models were developed to predict collision frequency and consequence at individual crossings. A two–dimensional graphic approach was adopted to combine these two models together to predict the risk at each crossing. Hotspots based on collision history tended to be widespread ...
متن کاملEvaluation of Safety at Railroad-Highway Grade Crossings
The motor vehicle-train accident, though infrequent, is the most severe in terms of fatalities, personal injuries, and property damage per accident of all types experienced on American highways. This type of accident, however, can be eliminated only by closing all crossings to highway traffic or by constructing grade separations for all rail-highway crossings. The delay and congestion resulting...
متن کاملImpacts of Wheel–rail at Railway Turnouts
Investigation of vertical vibrations of a railway turnout is important in designing track components under moving loads of trains. In this paper, the turnout is simulated by a linear finite element model with modal damping. A section of the turnout has a length of 36 sleeper spans surrounding the crossing. Rails and sleepers are modeled with uniform Rayleigh- Timoshenko beam elements. The rail...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Occupational health & safety
دوره 71 8 شماره
صفحات -
تاریخ انتشار 2002