Data-Driven Reservoir Modeling Data-Driven Reservoir Modeling Top-Down Modeling (TDM) A Paradigm Shift in Reservoir Modeling The Art and Science of Building Reservoir Models Based on Field Measurements
نویسنده
چکیده
منابع مشابه
3D and 4D Seismic Data Integration in Static and Dynamic Reservoir Modeling: A Review
Reservoir modeling is the process of generating numerical representations of reservoir conditions and properties on the basis of geological, geophysical, and engineering data measured on the Earth’s surface or in depth at a limited number of borehole locations. Therefore, reservoir modeling requires an incorporation of the data from a variety of sources, along with an integration of knowledge a...
متن کاملLab and Field Scale Modeling of Near Miscible CO2 Injection in Different Porous Mediums
The main purpose of this investigation is to study the effect of near miscible CO2 injection in different porous mediums on both lab and field scales. This effect can be traced by the change of two-phase gas-oil relative permeability curves. In this work, the experiments have been performed on three rock types (i.e. sandstone, dolomite, and artificial fractured sandstone) based on an incrementa...
متن کاملA new investigation on modeling of permeability reduction during CO2 flooding processes in sandstone oil reservoirs
Permeability reduction in oil reservoirs during primary oil recovery and using the enhanced oil recovery methods are complicated problem which most of the oil field in worlds has encountered. In this work, a modified model based on four phase black oil model (oil, water, gas, and asphaltene) was developed to account permeability reduction during CO2 flooding in cylindrical coordinates around a ...
متن کاملA Novel Assisted History Matching Workflow and its Application in a Full Field Reservoir Simulation Model
The significant increase in using reservoir simulation models poses significant challenges in the design and calibration of models. Moreover, conventional model calibration, history matching, is usually performed using a trial and error process of adjusting model parameters until a satisfactory match is obtained. In addition, history matching is an inverse problem, and hence it may have non-uni...
متن کاملAn Evaluation of Rock Integrity and Fault Reactivation in the Cap Rock and Reservoir Rock Due to Pressure Variations
Cap rocks are dams which can prevent the upward movement of hydrocarbons. They have disparities and weaknesses including discontinuities, crushed areas, and faults. Gas injection is an effective mechanism for oil recovery and pore pressure. With increasing pore pressure, normal stress is reduced, and the integrity of impermeable boundaries (cap rock, fault, etc.) becomes instable. A successful ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017