Scroll Compressor: Thrust Bearing Design with Rigid Body Dynamics of the Runner Plate
نویسنده
چکیده
منابع مشابه
Development of Large Capacity CO2 Scroll Compressor
CO2 refrigerant with a high operating pressure has a large difference between the suction and discharge pressures in compressors. Because of a load increase, the high performance and high reliability of compressors are required. Compared to the scroll compressor employing the conventional refrigerant, the thrust load increases in the CO2 scroll compressor. Therefore the design of thrust bearing...
متن کاملFrictional Characteristics of Thrust Bearing in Scroll Compressor
This paper presents frictional characteristics of thrust bearing in scroll compressor. The coefficient of friction in thrust bearing was measured by both elemental friction test and loss classification based on the performance test of actual scroll compressor, and investigated frictional characteristics focusing on the behavior of sliding portion which affects the generation of oil film by expe...
متن کاملMechanical Loss Reduction at Thrust Bearings of Scroll Compressors Using R407C
This paper presents the experimental research into high mechanical efficiency at thrust bearings of low-side scroll compressors for air conditioners with the new refrigerant R407C and Polyolester (POE) lubricant. In order to examine the friction loss at the thrust bearing under a test condition which is close to the actual running condition of compressors, the authors developed a friction test ...
متن کاملAn Experimental Analysis on the Flow Rate in Scroll Compressors
Experimental analysis on the oil supply characteristics of scroll compressor for package air conditioner has been presented based on the experimental apparatus operating at variable speed Scroll compressor has four major lubricating parts : the lower journal bearing, the main journal bearing, the orbiting scroll journal bearing and the thrust bearing between the orbiting scroll and the main fra...
متن کاملDesign of Phase-Angled Balance Weights for an Inverter Driven Scroll Compressor
This paper presents a new design method of balance weights with phase angles for scroll compressors. Based on force and moment balances on crankshaft and compressor frame, mathematical formulation of shaft bearing loads, unbalanced force and moment acting on the frame has been made in terms of balance weight design parameters such as masses and phase angles of the upper and lower balance weight...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014