Polarization response measurement and simulation of rigid endoscopes
نویسندگان
چکیده
Polarized light can reveal diagnostic information about tissue morphology. To promote easy adoption of polarization imaging techniques in the clinic it would be beneficial if they can be used with standard medical imaging instruments such as rigid endoscopes. We have characterized the polarization properties of two commercial laparoscopes and observed birefringence effects that complicate polarization imaging. Possible solutions are discussed that may be of interest to other tissue polarization imaging researchers.
منابع مشابه
Design, Fabrication and Measurement of Two-Layered Quadruple-Band Microwave Metamaterial Absorber
The design, simulation, fabrication, and measurement of two structures of metamaterial absorbers (MA) is investigated at microwave frequency in this paper. By stacking of one layer structure on the top of each other, a two-layered structure is generated. The unit cell at each layer consisting of two sets of various circular and square patches are designed so that the structure exhibit quad band...
متن کاملAn Adaptive-Robust Control Approach for Trajectory Tracking of two 5 DOF Cooperating Robot Manipulators Moving a Rigid Payload
In this paper, a dual system consisting of two 5 DOF (RRRRR) robot manipulators is considered as a cooperative robotic system used to manipulate a rigid payload on a desired trajectory between two desired initial and end positions/orientations. The forward and inverse kinematic problems are first solved for the dual arm system. Then, dynamics of the system and the relations between forces/momen...
متن کاملInvestigation of concentration polarization in a cross-flow nanofiltration membrane: Experiment and CFD modelling
Numerous researches have been investigated on the mass transfer phenomena and hydrodynamics for the fluid in the vicinity of the membrane surface by the mathematical modelling and simulation. Due to complexities involved in solving transport phenomena within membranes, the application of CFD simulation study for determining the concentration polarization (CP) profile in the membrane channel is ...
متن کاملFabrication of Free Air Well Type Ionization Chamber and Calculational Assessment and Measurement of Its Operational Characteristics
Introduction: Well type ionization chamber is a measuring device which is used to determine the activity of brachytherapy sources. The chamber has a cylindrical volume in which a cylindrical tube is mounted in the middle of the chamber. For the measurements, the brachytherapy sources are transferred to the middle of the tube. Materials and Methods: For designing the well type chamber, the measu...
متن کاملCalculating CR-39 Response to Radon in Water Using Monte Carlo Simulation
Introduction CR-39 detectors are widely used for Radon and progeny measurement in the air. In this paper, using the Monte Carlo simulation, the possibility of using the CR-39 for direct measurement of Radon and progeny in water is investigated. Materials and Methods Assuming the random position and angle of alpha particle emitted by Radon and progeny, alpha energy and angular spectrum that arri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 1 شماره
صفحات -
تاریخ انتشار 2010