Microfabrication of Aircore Toroidal Inductorwith Very High Aspect Ratio Metalencapsulated Polymer Vias
نویسندگان
چکیده
منابع مشابه
A Rapid Prototyping Microfabrication Method Using High-temperature Castable Material for High-throughput Micro-injectiong Molding
In this research, a new scheme of rapid prototyping using high-temperature castable materials for microfabrication of polymer lab-on-a-chip, which is used for micro-injection molding is proposed and characterized with extension of the replaceable mold disk technology. Showing perfect master mold creation of ultra-high density channel with aspect ratio of ~0.7, the proposed process is well fitte...
متن کاملAn Insulator-Lined Silicon Substrate-Via Technology With High Aspect Ratio
We have developed a novel high-aspect ratio substratevia technology in silicon that features a SiN insulator liner. In this technology, the via is completely filled with electroplated Cu. We have demonstrated vias with an aspect ratio of 30 and we have verified the integrity of the liner in vias with an aspect ratio of 8. The impedance of individual vias was measured in the microwave regime usi...
متن کاملA quantitative study on the adhesion property of cured SU-8 on various metallic surfaces
SU-8 has received wide attention in recent years because of its application in the fabrication of high aspect ratio microstructures and devices. This negative resist is known for its excellent lithography properties using ultraviolet light source. As the microfabrication technology based on UV-lithography of SU-8 finds wide applications, a good understanding and characterization of cured SU-8 p...
متن کاملFabrication of High-Aspect-Ratio 3D Hydrogel Microstructures Using Optically Induced Electrokinetics
We present a rapid hydrogel polymerization and prototyping microfabrication technique using an optically induced electrokinetics (OEK) chip, which is based on a non-UV hydrogel curing principle. Using this technique, micro-scale high-aspect-ratio three-dimensional polymer features with different geometric sizes can be fabricated within 1–10 min by projecting pre-defined visible light image patt...
متن کاملA Wafer Level Vacuum Encapsulated Capacitive Accelerometer Fabricated in an Unmodified Commercial MEMS Process
We present the design and fabrication of a single axis low noise accelerometer in an unmodified commercial MicroElectroMechanical Systems (MEMS) process. The new microfabrication process, MEMS Integrated Design for Inertial Sensors (MIDIS), introduced by Teledyne DALSA Inc. allows wafer level vacuum encapsulation at 10 milliTorr which provides a high Quality factor and reduces noise interferenc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012