Accurate Modeling of Axisymmetric Two-Port Junctions in Coaxial Lines Using the Finite Element Method
نویسنده
چکیده
model, it is possible to change one element (&) and then to compensate others to reestablish a good fit. However, the fact that an improved fit is achieved when the first slice is allowed to differ suggests that there are significant differences in the field structure in the gate feed region. In particular, the source resistance is large in the first slice and negligible in the remainder. This could be Accurate Modeling of Axisymmetric Two-Port Junctions in Coaxial Lines Using the Finite Element Method
منابع مشابه
Axisymmetric Scaled Boundary Finite Element Formulation for Wave Propagation in Unbounded Layered Media
Wave propagation in unbounded layered media with a new formulation of Axisymmetric Scaled Boundary Finite Element Method (AXI-SBFEM) is derived. Dividing the general three-dimensional unbounded domain into a number of independent two-dimensional ones, the problem could be solved by a significant reduction in required storage and computational time. The equations of the corresponding Axisymmetri...
متن کاملA Mass Conservative Method for Numerical Modeling of Axisymmetric flow
In this paper, the cell-centered finite volume method (CC-FVM) has been presented to simulate the axisymmetric radial flow toward a pumping well. The model is applied to the unstructured triangular grids which allows to simulate inhomogeneous and complex-shaped domains. Due to the non-orthogonality of the irregular grids, the multipoint flux approximation (MPFA) methods are used to discretize t...
متن کاملOptimization of Axisymmetric Extrusion Die Profiles
In this research, optimization process of axisymmetric extrusion dies is proposed. Plastic zone is analyzed using finite element method in the Eulerian system with flow formulation. The die profiles are defined by Bezier curves with six control points. Two effective functions are considered in this research; standard deviation of the strain rate and the rate of energy consumption during extrusi...
متن کاملModeling of 3-D Surface Roughness Effects With Application to -Coaxial Lines
Effects of 3-D surface roughness on the propagation constant of transverse electromagnetic transmission lines are calculated using finite-element method software by solving for the fields inside conductors. The modeling is validated by comparison with available literature results for the special case of 2-D surface roughness and by simulations using the finite-integration technique. Results for...
متن کاملAnalysis of Axisymmetric and Non-Axisymmetric Stretching of Sheet Metals by the Finite Element Method
Stretching process of sheet metals in both cases of axisymmetric and non-axisymmetric is analyzed. A rigid-plastic, normal anisotrop material is assumed and large strain formulation is applied. Triangular elements are used and stiffness equations of elements are obtained from virtual work principle. These nonlinear equations are linearized by Newton-Raphsons method and are solved by Gaussian el...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010