The Coupling Fields Characteristics of Cable Joints and Application in the Evaluation of Crimping Process Defects
نویسندگان
چکیده
Fan Yang 1, Kai Liu 1,*, Peng Cheng 2, Shaohua Wang 3, Xiaoyu Wang 3, Bing Gao 1, Yalin Fang 1, Rong Xia 4 and Irfan Ullah 1 1 State Key Laboratory of Power Transmission Equipment & System Security and New Technology, School of Electrical Engineering, Chongqing University, Chongqing 400044, China; [email protected] (F.Y.); [email protected] (B.G.); [email protected] (Y.F.); [email protected] (I.U.) 2 Chengdu Electrical Power Department, SiChuan Electrical Power Company, Chengdu 610041, China; [email protected] 3 State Grid Zhejiang Electric Power Company, Hangzhou 310008, China; [email protected] (S.W.); [email protected] (X.W.) 4 The Wuhan Branch of China Electric Power Research Institute, Wuhan 430071, China; [email protected] * Correspondence: [email protected]; Tel.: +86-23-6511-1935
منابع مشابه
Vulnerability Assessment of Steel Structures in District 12 of Mashhad City and Prioritizing the Welding Defects Using the Analytic Hierarchy Process
Recently, steel structures have been accounted for a large percentage of the buildings due to their advantages such as higher execution speed and easier construction. In steel structures, welded joints are commonly used and their quality plays a key role in stability of buildings under applied loads. Hence, to increase resiliency of welded steel structures against natural hazards, welded joints...
متن کاملInvestigation on Effect of Heat Input on the Microstructure and Mechanical Properties of Hadfield Steel Weld Joints in SMAW Process
In this investigation, the effect of heat input of SMAW process on the microstructure and mechanical properties of Hadfield steel weld joints was investigated. For this purpose, 4 annealed sheets with thickness 2 mm prepared from Hadfield steel and then welding applied by SMAW process with 6.75 and 11.25 kJ/mm heat input values. The evaluation of the microstructures of welding joints was condu...
متن کاملDynamic Behavior Analysis of a Planar Four-bar Linkage with Multiple Clearances Joint
In practice, clearances in the joints are inevitable due to tolerances, and defects arising from design and manufacturing. In the presence of clearance at a joint, a mechanism gains some additional, uncontrollable degrees of freedom which are the source of error. Moreover, joints undergo wear and backlashes and so cannot be used in precision mechanisms. In this study, the dynamic behaviour of ...
متن کاملOn the Characteristics of Friction Stir Welding Lap Joint of Magnesium and Aluminum
Lap joints of commercially pure magnesium plates to aluminium plates (Magnesium plate on the top, and Aluminium plate, grade 1100, on the bottom side) were conducted by friction stir welding using various traveling and rotation speeds of the tool to investigate the effects of the welding parameters on the joint characteristics and strength. Defect-free lap joints were obtained in the welding tr...
متن کاملMicrostructure and mechanical properties of similar and dissimilar welding joints of weathering steel and plain carbon steel by GMAW with CO2 shielding gas
The welding joints were investigated due to the significance of similar welding of Corten A weathering steel and its dissimilar welding with St12 plain carbon steel in industrial applications. The gas metal arc welding (GMAW) technique with carbon dioxide shielding gas was utilized in the present work. The welding process comprised current and voltage control, welding wire injection rate, shiel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016