Fracture of Metal Coated Elastomers

نویسندگان

  • Nicholas J. Douville
  • Zhengyu Li
  • Shuichi Takayama
چکیده

Polydimethyldisiloxane (PDMS) substrates were coated with thin layers of gold varying in thickness between 40 nm and 160 nm. Arrays of parallel cracks formed when a tensile strain was applied to the coated system, with the spacing between the cracks being approximately inversely proportional to the strain. When the crack profiles were examined, it was noted that the cracks extended deep into the substrate – to depths up to two orders of magnitude greater than the film thickness. This extension of the cracks into the substrate is the result of the large mismatch in elastic properties between the metal and soft substrate, and plays a role in the development 10

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Friction-Stir-Processing Effect on Fracture Toughness of Oil Pipelines in ST 37 Group Before/After Nano ZrO2-Coating

Herein, Compact-Testing (CT ) and Charpy V-Notch (CVN) testing have been done on four Friction-Stir-Processed (FSPed) samples: BM (Base-Metal), FS (FSPed-Sample), FN5 (FSP Nano-ZrO2-coated/560 rpm rotational speed) and FN9 (FSP Nano-ZrO2-coated/900 rpm), to investigate the KIC and the dominant parameters on it for St 37 steel. Experiments are also surveyed and validated by ABAQUS. Results showe...

متن کامل

Localization of folds and cracks in thin metal films coated on flexible elastomer foams.

Thin metal films coated on soft elastomeric foam substrates exhibit enhanced electromechanical performance. The open-cell foam structure conveys highly anisotropic mechanical properties within the top, thin capping elastomer at the surface of the foam. Upon stretching, large strain fields inducing cracks and folds localize above the foam cells, while the surrounding cell ligaments remain almost...

متن کامل

Novel Functionalized Polyolefins as Compatibilizers in Polyolefin/polyamide 6 Blends and Polyethylene/metal Hydroxide Composites

Ricinoloxazoline maleinate (OXA) was grafted by melt free radical grafting onto polyolefins and elastomers to produce new compatibilizers for polymer blends. Effects of initial monomer and peroxide concentrations on the degree of grafting, on the amount of residual monomer, and on the side reactions were investigated. Reactive compatibilizers could be prepared with a suitable choice of processi...

متن کامل

Nanoparticle-coated PDMS elastomers for enhancement of Raman scattering.

A simple but efficient method for highly sensitive Raman detection, covering a thin polydimethylsiloxane elastomer, pre-coated with a layer of Au or Ag nanoparticles, onto the detected substrate, is proposed. Moreover, this nanoparticle-coated PDMS elastomer can be used for chemical imaging with high sensitivity.

متن کامل

A Fiber Damage Model for Early Stage Consolidation of Metal-coated Fibers

Recent studies of the high temperature consolidation of titanium alloy coated c+alumina fiber tows and BC monofilaments have both revealed the widespread occurrence of fiber bending and fracture during early stage consolidation. This damage was shown to arise from the bending of unaligned fibers during consolidation and was found to be affected by the mechanical behavior of the metal-metal cont...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011