Some Studies of Crack Dynamics
نویسنده
چکیده
Recent developments in fracture dynamics include the discovery of elastic waves which propagate along moving crack fronts in three-dimensional solids, and the identification of possible sources of the roughening and low terminal speeds of tensile cracks in brittle amorphous solids. Those topics are discussed briefly here.
منابع مشابه
Using Pattern Search Algorithm and Finite Element Method to Detect Rotor Cracks
The vibration pattern of a rotor system reflects the mechanical parameter changes in the system. Hence, the use of vibration monitoring is considered as a possible means of detecting the presence and growth of the cracks. In this paper, a pattern search based method for shaft crack detection is proposed and described which formulates the shaft crack detection as an optimization problem by means...
متن کاملEffect of Boundary Condition on Pre-Existing Crack Under Fatigue Loading
In this paper, the present investigation has been conducted keeping in mind some of the problems concerning the crack propagation direction and growth under constant loading in an inclined crack geometry. The present studies mainly focused on the development and modifications in the crack growth criterion to account the biaxial, shear loading and number of stress terms. Existing criteria for th...
متن کاملModelling of the evolution of crack of nanoscale in iron
Metal owns the ability of self-healing to some extent, and the ability of the internal crack healing is most desirable for improving the reliability of metal. A molecular dynamics simulation has been further developed to investigate the evolution of a nanoscale crack in body centred cubic Fe crystal under the conditions of heating or compressive pressure. When system temperature drops, the evol...
متن کاملPrinciple of Maximum Energy Dissipation Rate in Crack Dynamics
THE PRINCIPLE of maximum energy dissipation rate is introduced as an energy criterion for crack dynamics. That allows us to explain observed limiting crack speeds in brittle materials, and to complete the crack dynamics formulation. The upper limits of the crack speed in perfectly elastic and elastic-plastic bodies are obtained. It is found that the theoretical maximum crack speed in an isotrop...
متن کاملDetermination of Tensile Strength and Crack Growth of a Typical Polymer Concrete Using Circular Disc Samples
Cracked and un-cracked Brazilian disc specimens subjected to diametral compression were used for conducting fracture toughness and tensile strength experiments on a polymer concrete (PC) material. The value of mode I fracture toughness (KIc) was determined from the center- cracked Brazilian disc and the indirect tensile strength (σt) was obtained from the un-cracked Brazilian disc specimen. The...
متن کامل