Optimization MRR Of Stainless Steel 403 In Abrasive Water Jet Machining UsingAnova And Taguchi Method
نویسندگان
چکیده
Stainlesssteel 403 is high-alloysteelwith good corrosion resistance and it’svery hard material. Abrasive water jet is an effective method for machining, cutting and drilling of stainlesssteel 403. In thispaperweoptimize the metalremoval rate of stainlesssteel 403 in abrasive water jet machining. The MRRisoptimize by usingthreeparameters water pressure, abrasive flow rate and stand-off distance and L9 orthogonal array of Taguchimethod use to analyse the result. 9 experimentalrunsbased on L9 orthogonal array of Taguchimethod. KeywordsAbrasive water jet machine, stainless steel 403, garnet 80 mesh, L9 orthogonal array of Taguchi method, water pressure, abrasive flow rate, stand-off distance, MRR, S/N ratio
منابع مشابه
Optimization of Control Parameters for MRR in Injection Flushing Type of EDM on Stainless Steel 304 Workpiece
The operating control parameters of injection flushing type of electrical discharge machining process on stainless steel 304 workpiece with copper tools are being optimized according to its individual machining characteristic i.e. material removal rate (MRR). Lower MRR during EDM machining process may decrease its’ machining productivity. Hence, the quality characteristic for MRR is set to high...
متن کاملA comparative Experimental Analysis of Sea sand as an abrasive material using Silicon carbide and mild steel Nozzle in vibrating chamber of Abrasive Jet machining process
A number of investigations carried out in an abrasive jet machining process having a traditional material with traditional nozzle. In some publication are focusing on water jet cutting machining and some are focusing on sand bond grinding , some work are wear behavior of nozzle and some are on performance of material in water jet machining. The present research work give an analysis of performa...
متن کاملParametric analysis of Abrasives water jet machining of EN8 Material
Abrasive water jet machine (AWJM) is a mechanical base non-conventional machining process. This is process of removal of materials by impact erosion of high pressure (1500-4000 bar), high velocity of water and entrained high velocity of grit abrasives on a work piece. Experimental investigations were conducted to assess the influence of abrasive water jet machining (AWJM) process parameters on ...
متن کاملParametric Optimization of Magnetic Abrasive Water Jet Machining Of AISI 52100 SteelUsing Grey Relational Analysis
Abrasive machining is one of the most non-conventional processes for finishing. It is widely used in industry to machine the materials like mild steel, aluminum, copper, titanium, glass, hard rock material, graphite, composite material, ceramics etc.Like in abrasive jet machining. This technique uses jet which contains abrasive material. Now a day water-magnetic abrasive machining is one of the...
متن کاملExperimental Investigation and Process Variable Optimization of Abrasive Flow Machining Process for Satellite Component
Abrasive flow machining (AFM) is an advance machining process which is used to machine complex shape and is used to deburr, remove recast layer and radius surfaces. This research uses a developed abrasive flow machine and an experiment employing abrasive flow machining was conducted on plunger body fabricated on stainless steel SS 446. In this research AFM parameters such as abrasive particle s...
متن کامل