The Effect of Thermal Expansion in a Dry Clutch on Launch Control ?

نویسنده

  • Andreas Myklebust
چکیده

A dry clutch model with thermal dynamics is added to a driveline model of a heavyduty truck equipped with an automated manual transmission. The model captures driveline oscillations and can be used to simulate how different clutch-control strategies affect vehicle performance, drivability and comfort. Parameters are estimated to fit a heavy-duty truck and the complete model is validated with respect to shuffle, speed trajectory, clutch torque and clutch lock-up/break-apart behavior. The model shows good agreement with data. Furthermore the model is used to study the effect of thermal expansion in the clutch on launch control. It is shown that the effect of thermal expansion, even for moderate temperatures, is significant in launch control applications.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation and investigation of the effect of oil flow rate, electric signal of flow control valve and controller on the performance of a wet clutch

The using of wet clutches and hydraulic control devices causes a smoothly torque transfer. In this study, a wet clutch was simulated in Simulink MATLAB software. Firstly the mechanical section of the clutch was modeled and then the hydraulic section was simulated with the addition of electric flow control valve and inlet and outlet of oil flow.  Finally, the effects of oil flow rate, electric s...

متن کامل

Modeling and Estimation for Dry Clutch Control

Increasing demands on comfort, performance, and fuel efficiency in vehicles lead to more complex transmission solutions. One such solution is the Automated Manual Transmission (AMT). It works just like an ordinary manual transmission but the clutch and gear selection are computer controlled. In this way high efficiency can be accomplished with increased comfort and performance. To be able to co...

متن کامل

Dry Clutch Modeling, Estimation, and Control

Increasing demands on comfort, performance, and fuel efficiency in vehicles lead to more complex transmission solutions. One such solution is the Automated Manual Transmission (AMT). It works just like an ordinary manual transmission but the clutch and the gear selection are computer controlled. In this way high efficiency can be accomplished with increased comfort and performance. To be able t...

متن کامل

Real World Modeling and Nonlinear Control of an Electrohydraulic Driven Clutch

In this paper, a complete model of an electro hydraulic driven dry clutch along with its performance evaluation has elucidated. Through precision modeling, a complete nonlinear physical and full order sketch of clutch has drawn. Ultimate nonlinearities existent in the system prohibits it from being controlled by conventional linear control algorithms and to compensate the behavior of the sy...

متن کامل

Effect of Variable Thermal Expansion Coefficient and Nanofluid Properties on Steady Natural Convection in an Enclosure

Steady state natural convection is numerically investigated in an enclosure using variable thermal conductivity, viscosity and thermal expansion coefficient of Al2O3–water nanofluid. This study has been conducted for a wide range of Rayleigh numbers (103≤ Ra ≤ 106), concentrations of nanoparticles (0% ≤ Φ ≤ 7%), enclosure aspect ratios (0.5 ≤ AR ≤ 2) and temperature differences between the cold...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013