Multi-objective optimization for turning processes using neural network modeling and dynamic-neighborhood particle swarm optimization

In this paper, we introduce a procedure to formulate and solve optimization problems for multiple and conflicting objectives that may exist in turning processes. Advanced turning processes, such as hard turning, demand the use of advanced tools with specially prepared cutting edges. It is also evident from a large number of experimental works that the tool geometry and selected machining parameters have complex relations with the tool life and the roughness and integrity of the finished surfaces. The non-linear relations between the machining parameters including tool geometry and the performance measure of interest can be obtained by neural networks using experimental data. The neural network models can be used in defining objective functions. In this study, dynamicneighborhood particle swarm optimization (DN-PSO) methodology is used to handle multi-objective optimization problems existing in turning process planning. The objective is to obtain a group of optimal process parameters for each of three different case studies presented in this paper. The case studies considered in this study are: minimizing surface roughness values and maximizing the productivity, maximizing tool life and material removal rate, and minimizing machining induced stresses on the surface and minimizing surface roughness. The optimum cutting conditions for each case study can be selected from calculated Pareto-optimal fronts by the user according to production planning requirements. The results indicate that the proposed methodology which makes use of dynamic-neighborhood particle swarm approach for solving the multiobjective optimization problems with conflicting objectives is both effective and efficient, and can be utilized in solving complex turning optimization problems and adds intelligence in production planning process.