How the charge-neutrality level of interface states controls energy level alignment in cathode contacts of organic bulk-heterojunction solar cells.
نویسندگان
چکیده
Electronic equilibration at the metal-organic interface, leading to equalization of the Fermi levels, is a key process in organic optoelectronic devices. How the energy levels are set across the interface determines carrier extraction at the contact and also limits the achievable open-circuit voltage under illumination. Here, we report an extensive investigation of the cathode energy equilibration of organic bulk-heterojunction solar cells. We show that the potential to balance the mismatch between the cathode metal and the organic layer Fermi levels is divided into two contributions: spatially extended band bending in the organic bulk and voltage drop at the interface dipole layer caused by a net charge transfer. We scan the operation of the cathode under a varied set of conditions, using metals of different work functions in the range of ∼2 eV, different fullerene acceptors, and several cathode interlayers. The measurements allow us to locate the charge-neutrality level within the interface density of sates and calculate the corresponding dipole layer strength. The dipole layer withstands a large part of the total Fermi level mismatch when the polymer:fullerene blend ratio approaches ∼1:1, producing the practical alignment between the metal Fermi level and the charge-neutrality level. Origin of the interface states is linked with fullerene reduced molecules covering the metal contact. The dipole contribution, and consequently the band bending, is highly sensitive to the nature and amount of fullerene molecules forming the interface density of states. Our analysis provides a detailed picture of the evolution of the potentials in the bulk and the interface of the solar cell when forward voltage is applied or when photogeneration takes place.
منابع مشابه
Energy-Level Alignment at Metal-Organic and Organic-Organic Interfaces in Bulk-Heterojunction Solar Cells
Ultra violet photoelectron spectroscopy measurements in combination with the Integer Charge Transfer model is used to obtain the energy level alignment diagrams for two common types of bulk heterojunction solar cell devices based on poly(3-hexylthiophene) or poly(2-methoxy-5-(3’,7’-dimethyloctyloxy)-1,4-phenylene vinylene) as the donor polymer and (6,6)phenyl-C61-butric-acid as the acceptor mol...
متن کاملRole of the Charge Neutrality Level at Metal/Organic and Organic/Organic Interfaces
This paper describes how the concepts of Charge Neutrality Level (CNL) and Induced Density of Interface States (IDIS) can successfully explain the energy level alignment at metal-organic and organic-organic interfaces. We propose that the CNL acts as an effective Fermi level for the organic semiconductor: its partial alignment with the metal Fermi level (in the case of metal-organic interfaces)...
متن کاملEnergy level alignment at organic heterojunctions: Role of the charge neutrality level
We present a mechanism that explains the energy-level alignment at organic-organic sOOd semiconductor heterojunctions. Following our work on metal/organic interfaces, we extend the concepts of charge neutrality level sCNLd and induced density of interface states to OO interfaces, and propose that the energy-level alignment is driven by the alignment of the CNLs of the two organic semiconductors...
متن کاملStudies of Charge Transport and Energy Level in Solar Cells Based on Polymer/Fullerene Bulk Heterojunction
متن کامل
Interface investigation and engineering – achieving high performance polymer photovoltaic devices†‡
The contact between the polymer active layer and the electrode is one the most critical interfaces in polymer solar cells. In this article, we report the progress of interface engineering in polymer solar cell research, where the multiple functions of the interfacial materials will be discussed. The vertical composition profile in polymer:fullerene blends is an emerging topic, and the interlaye...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- ACS nano
دوره 6 4 شماره
صفحات -
تاریخ انتشار 2012